Mold Flow Modeling of ArcelorMittal Riverdale and POSCO Thin Slab Casters

2010-05-06
Yavuz, Mehmet Metin
Lee, S M
Neale, Kevin

Suggestions

Void initiation in spheroidized 1035 steel.
Bilici, Ali; Öztürk, Tayfur; Department of Metallurgical Engineering (1988)
Void growth based inter-granular ductile fracture in strain gradient polycrystalline plasticity
Tandogan, I. T.; Yalçınkaya, Tuncay; Ozdemir, I (2021-12-01)
The precipitation hardened, high strength aerospace alloys (e.g. Al 7000 alloy series) suffer from loss of fracture toughness due to the heat treatment leading to intergranular ductile fracture. Depending on the quenching and aging processes, large precipitates at the grain boundaries with wide precipitate free zones might develop. Therefore the grain boundaries constitute a potential location for micro void formation and evolution under the effect of external loads. This is a common problem of such materia...
Punching shear tests of normal- and high-strength concrete flat plates
Ozden, Sevket; Ersoy, Ugur; Ozturan, Turan (Canadian Science Publishing, 2006-11-01)
Experimental research was conducted to investigate the punching shear performance of flat plates. A large number of slab specimens of normal- and high-strength concrete were tested Under concentric and eccentric loads. The effects of flexural reinforcement and the use of steel fiber reinforcernent were investigated. Experimental expressions werw developed for the computation Of residual slab strength. Experimentally observed punching, shear capacities were compared with those from the provisions of Canadian...
Void fraction measurement in a two-phase flow system with impediance probe technique.
Hosanoğlu, Tufan; Yeşin, Orhan; Department of Mechanical Engineering (2002)
Wedge shear testing of clayey gravels under higher normal stresses
Şakar, Mehmet; Mirata, Türker; Department of Civil Engineering (1997)
Citation Formats
M. M. Yavuz, S. M. Lee, and K. Neale, “Mold Flow Modeling of ArcelorMittal Riverdale and POSCO Thin Slab Casters,” 2010, vol. 1, p. 1291, Accessed: 00, 2021. [Online]. Available: https://hdl.handle.net/11511/85259.