Show/Hide Menu
Hide/Show Apps
Logout
Türkçe
Türkçe
Search
Search
Login
Login
OpenMETU
OpenMETU
About
About
Open Science Policy
Open Science Policy
Communities & Collections
Communities & Collections
Help
Help
Frequently Asked Questions
Frequently Asked Questions
Guides
Guides
Thesis submission
Thesis submission
MS without thesis term project submission
MS without thesis term project submission
Publication submission with DOI
Publication submission with DOI
Publication submission
Publication submission
Supporting Information
Supporting Information
General Information
General Information
Copyright, Embargo and License
Copyright, Embargo and License
Contact us
Contact us
Post Buckling Load Redistribution of Stiffened Panels in Aircraft Wingbox Structures
Date
2016-01-04
Author
Mert, Mesut
Kayran, Altan
Metadata
Show full item record
Item Usage Stats
60
views
0
downloads
Cite This
URI
http://arc.aiaa.org/series/6.scitech
https://hdl.handle.net/11511/85428
DOI
https://doi.org/10.2514/6.2016-1974
Conference Name
AIAA Science and Technology Forum and Exposition 2016, (4 - 08 Ocak 2016)
Collections
Department of Aerospace Engineering, Conference / Seminar
Suggestions
OpenMETU
Core
Post-cyclic settlement and tilting potential of mat foundations
UNUTMAZ, BERNA; Çetin, Kemal Önder (2012-12-01)
A simplified procedure for the estimation of cyclic shear stresses on foundation soil layers due to interactions of seismic excitation, foundation mat and overlying structural system, incorporating both kinematic and inertial aspects was described earlier in Cetin et al. 11,2]. This simplified procedure is now used, along with laboratory-based cyclic shear and volumetric strain relationships for the assessment of cyclically induced settlement and tilting potential of mat foundations. The proposed methodolog...
Post-extrusion heat-treatment as a facile method to enhance the mechanical properties of extruded xylan-based polymeric materials
AKKUS, Merve; BAHÇEGÜL, Erinc; Özkan, Necati; Bakir, Ufuk (2014-01-01)
Hemicelluloses are among the most abundant renewable polymers in nature, and their processing into biodegradable polymeric materials via extrusion was recently reported as a novel alternative technique for solvent casting. A simple heat-treatment step conducted after the extrusion of corn cob xylans was found to enhance the mechanical properties of strips by altering their moisture absorption behavior. Depending on the heat-treatment temperature, which varied between 60 degrees C and 150 degrees C, xylan- b...
Post-annealing Temperature Effect on Electrical Properties of Al2O3 Films on Silicon by Atomic Layer Deposition for Solar Cell Applications
Dönerçark, Ergi; İmer, Muhsine Bilge; Turan, Raşit (2018-11-25)
Silicon wafers, being the most dominant and almost inevitable material for solar cell production, require surface passivation to increase the solar cell efficiency by decreasing recombination losses. For this reason, several research groups are currently focused on the usage of thin alumina (Al2O3) as a passivation layer. The success of Tunnel Oxide Passivating CONtact (TOPCon) solar cell, Passivated Emitter Rear Totally diffused (PERT) solar cell and Passivated Emitter Rear solar cell (PERC) structures dem...
Post-buckling behaviour of metallic skin-stringer assemblies and buckling of composite flat panels
Aydın, Enes; Kayran, Altan; Department of Aerospace Engineering (2018)
Stiffened thin panels are very common and important structural elements in aerospace structures because of the weight and stiffness advantages they provide. The stiffener section is important to determine the support condition that the stiffener provides on the unloaded edges of the panel. In the first phase of the thesis study, the effect of the boundary conditions on the buckling coefficients of stiffened metal flat panels is investigated utilizing finite element and empirical approaches. Empirical approa...
Post processing for wavelet domain HMT image resolution enhancement
Temizel, Alptekin (2007-06-13)
Wavelet domain image resolution enhancement algorithms assume that the available image is the low-frequency subband of a higher resolution image and high-frequency subbands are not available. Then, these high-frequency coefficients are estimated and the higher resolution image is generated by application of inverse wavelet transform. Some of these techniques have used probabilistic methods and utilisation of HMT (Hidden Markov Tree) was shown to produce promising results. HMT based methods model the wavelet...
Citation Formats
IEEE
ACM
APA
CHICAGO
MLA
BibTeX
M. Mert and A. Kayran, “Post Buckling Load Redistribution of Stiffened Panels in Aircraft Wingbox Structures,” presented at the AIAA Science and Technology Forum and Exposition 2016, (4 - 08 Ocak 2016), 2016, Accessed: 00, 2021. [Online]. Available: http://arc.aiaa.org/series/6.scitech.