Modeling of Circular Double Flange Joint Including Contact and Friction Effects

2015-09-10

Suggestions

MODELING OF A CIRCULAR DOUBLE FLANGE JOINT INCLUDING CONTACT AND FRICTION EFFECTS
Akay, Ahmet Arda; Yildirim, Alper; Çöker, Demirkan; Kayran, Altan; Gürses, Ercan (2015-09-12)
Modeling of radiative heat transfer in strongly forward scattering media of bubbling fluidized bed combustor with and without recycle
Şen, Özge; Külah, Görkem; Selçuk, Nevin; Department of Chemical Engineering (2017)
Predictive accuracy and CPU efficiency of geometric optics approximation (GOA) and scattering phase function simplifications in the freeboard of lignite-fired METU 0.3 MWt ABFBC Test Rig were tested by applying them to the modeling of radiative heat transfer and comparing their predictions against measurements and benchmark solutions. The freeboard was treated as 3-D rectangular enclosure containing grey, absorbing, emitting gas with grey, absorbing, emitting, non/isotropically/anisotropically scattering pa...
Modeling of Multi Open Phase Fault Condition of Multi-phase Permanent Magnet Synchronous Motors
Fei, Marco; Zanasi, Roberto (2011-09-10)
This paper deals with the modeling of multi-phase permanent magnet synchronous motors under multi open phase fault condition. The presented model is suitable for generic number of phases, generic shape of the rotor flux and generic number of open circuit faults. The motor model in fault condition can be used for faults occurring on both adjacent and not adjacent phases. The model can be very useful both for simulation and implementation of fault-tolerant control strategies.
Modeling of piston secondary dynamics and tribology
Keribar, Rifat; Dursunkaya, Zafer (1992-06-01)
This paper describes a general, design-oriented model for the analysis of secondary motions in conventional and articulated piston assemblies. The model solves for the axial, lateral and rotational departures in positions and motions from the nominal kinematics, resulting from clearances within the piston assembly and also between the piston assembly components and the cylinder. In order to accurately represent the effect of oil films, the model includes comprehensive treatments of hydrodynamic and boundary...
Modeling of Piston Secondary Dynamics and Tribology
Keribar, Rıfat; Dursunkaya, Zafer (1991-05-01)
Citation Formats
A. A. Akay, A. Yıldırım, D. Çöker, A. Kayran, and E. Gürses, “Modeling of Circular Double Flange Joint Including Contact and Friction Effects,” 2015, Accessed: 00, 2021. [Online]. Available: https://hdl.handle.net/11511/85680.