Synthesis and TL Characterization of Gd Doped Li2B4O7 for Neutron Measurements

İflazoğlu, Sera
Yılmaz, Ayşen
Kafadar, Vural Emir
Yazıcı, Ahmet Necmeddin


Synthesis and microstructural characterization of nano-size calcium phosphates with different stoichiometry
Ergun, Celaletdin; Evis, Zafer; Webster, Thomas J.; Sahin, Filiz Cinar (Elsevier BV, 2011-04-01)
Calcium phosphates with Ca/P molar ratios of 0.5, 0.75, 1.33, 1.5, 1.55, 1.67, 2.0, and 2.5 were synthesized by a wet chemistry precipitation method and sintered at 500 degrees C, 700 degrees C, 900 degrees C, 1100 degrees C and 1300 degrees C for 2 h. Presence of phases and microstructures of calcium phosphates were determined by X-ray diffraction and scanning electron microscopy. In all different Ca/P ratios, the precipitated phase was always hydroxyapatite with very small size and/or partial disorderness...
Synthesis and ion sensing properties of novel boradiazaindacene dyes
Zalim, Nalan; Akkaya, Engin Umut; Department of Chemistry (2003)
The derivatives of boradiazaindacene (BODIPY) are highly fluorescent dyes which have quantum yields near 1.0. These dyes that have exceptional spectral and photophysical stability as compared to other fluorescent groups are used for several different applications. The fluorescent sensor molecules for the detection of cations with PET (photoinduced-electron transfer) mechanism in general have been obtained by the differentiation of the BODIPY core. The extension of conjugation over the pyrrole ring shifts th...
Synthesis and characterization of conducting and non-conducting polymers of sodium 2,4,6-trichlorophenolate by microwave initiation
Cakmak, O; Basturkmen, M; Kisakurek, D (Elsevier BV, 2004-07-22)
A novel synthesis of poly(dichlorophenylene oxide) and a conducting polymer were achieved simultaneously from 2,4,6-trichlorophenol in a very short time, using microwave energy. The characterizations of poly(dichlorophenylene oxide) and the conducting polymer were performed by DSC, TGA, elemental analysis, FTIR, H-1 and C-13 NMR, SEM, MS and X-ray diffraction spectrometer analyses. The combined molecular weight of the polymer, 1.8 x 10(4), was determined by using viscometry measurement. Poly(dichlorophenyle...
Synthesis and characterization of poly(N-(2-(thiophen-3-yl)methylcarbonyloxyethyl)maleimide) and its spectroelectrochemical properties
Ak, Metin; Durmus, Asuman; Toppare, Levent Kamil (Springer Science and Business Media LLC, 2007-06-01)
A new monomer; N-(2-(thiophen-3-yl)methylcarbonyloxyethyl) maleimide (NMT) was synthesized. The chemical structure of the monomer was characterized by Nuclear Magnetic Resonance (H-1-NMR) and Fourier Transform Infrared (FTIR) Spectroscopy. Electrochemical polymerization of NMT was performed in acetonitrile (AN)/borontrifloride ethylether (BFEE) solvent mixture (1:1, v/v) where tetrabutylammonium tetrafluoroborate (TBAFB) was utilized as the supporting electrolyte. The resulting conducting polymer was charac...
Synthesis and structure elucidation of bromination products from dibromohomobenzonorbornadienes: high temperature bromination - Part 17
Kazaz, C; Dastan, A; Balcı, Metin (Wiley, 2005-01-01)
The electrophilic addition of bromine to dibromohomobenzonorbornadiene derivatives at -45 +/- 5degreesC led to the formation of the rearranged and non-rearranged tetrabromides in a ratio of 6:4. However, high-temperature bromination of the same system in CCl4 at 77degreesC produced only non-rearranged products. The formation mechanism of the isomers and the role of the substituent on the rearrangement is discussed. The structure elucidation of the isomeric tetrabromides was achieved from NMR spectral data. ...
Citation Formats
S. İflazoğlu, A. Yılmaz, V. E. Kafadar, and A. N. Yazıcı, “Synthesis and TL Characterization of Gd Doped Li2B4O7 for Neutron Measurements,” 2017, Accessed: 00, 2021. [Online]. Available: