Aluminum Doped Zinc Oxide by Atomic Layer Deposition for Device Applications

2019-09-06
Çakmak, Hüseyin
Yılmaz, Doğan
Öztürk, Mustafa
İmer, Muhsine Bilge
Özbay, Ekmel

Suggestions

Aluminum Oxide and Titanium Diboride Reinforced Metal Matrix Composite and Its Mechanical Properties
Kurtoğlu, Aziz; Sevinç, Naci; Department of Metallurgical and Materials Engineering (2004)
This study is on the production and testing of an aluminum metal matrix composite. Metal Matrix Composites can be produced in several different ways. In this study, an aluminum matrix composite is produced by direct addition of the reinforcement ceramic into the liquid metal. The ceramic reinforcement for this process was a mixture of TiB2 and Al2O3 which was produced by means of a thermite reaction of reactants Al, B2O3 and TiO2 all in powder form with their respective stoichiometric amounts. This ceramic ...
Aluminum Induced Glass Texturing (AIT) on Soda-Lime, Borosilicate, Alkali-Free and Silica Glass For Thin Film Solar Cell Applications
Ünal, Mustafa; Günöven, Mete; Tankut, Aydın; Sökmen, İlkay; Turan, Raşit (2015-12-10)
Texturing of glass substrate is an alternative novel method for light trapping, which to enhance the absorbed light by way of increasing the diffused transmittance (haze) so that the amount of absorbed light will be increased instead of texturing transparent conductive oxide (TCO). In this study, aluminum induced texturing (AIT) technique is used to texture different type of glasses to see the effect of the chemical composition on surface morphology and optical properties. Improvement in haze values as well...
Metallic glass/crystalline nanolayered coatings with high nanoscratch resistance and damage tolerance
Abboud, Mohammad; Motallebzadeh, Amir; Özerinç, Sezer (null; 2019-05-19)
Silicon Solar Cells With Silver Nanowire Network Top Electrodes
Aurang, Pantea; Doğanay, Doğa; Es, Fırat; Bek, Alpan; Turan, Raşit; Ünalan, Hüsnü Emrah (2016-12-02)
Nickel titanium alloys as orthodontic archwires: A narrative review
Uysal, Idil; Yilmaz, Bengi; Atilla, Aykan Onur; Evis, Zafer (2022-12-01)
Nickel-titanium (NiTi) archwires have been widely used in orthodontic treatments at the aligning and leveling step which is the initial stage of the treatment. This review presents the concepts related to NiTi archwires from the materials science and engineering perspective. Analysis of the research profile showed that mechanical properties as a research topic constituted 25.9 % of the research articles published in last two decades. The effects of processing parameters, stress and temperature on phase tran...
Citation Formats
H. Çakmak, D. Yılmaz, M. Öztürk, M. B. İmer, and E. Özbay, “Aluminum Doped Zinc Oxide by Atomic Layer Deposition for Device Applications,” 2019, Accessed: 00, 2021. [Online]. Available: https://hdl.handle.net/11511/86126.