TOP WIND STIFFENER AND SHELL INTERACTION FOR OPEN-TOP CYLINDRICAL STEEL TANKS

2018-09-14
Zeybek, Özer
Topkaya, Cem

Suggestions

Bottom-up Cu Electrochemical Filling of Wafer Level TSVs for MEMS 3D Integration
Soydan, Alper Kaan; Işık Akçakaya, Dilek; Külah, Haluk (null; 2019-09-30)
High-order detached eddy simulation of unsteady flow around NREL S826 airfoil
Yalçın, Özgür; Cengiz, Kenan; Özyörük, Yusuf (null; 2017-04-20)
High-order detached eddy simulation of unsteady flow around NREL S826 airfoil
Yalçın, Özgür; Özyörük, Yusuf (Elsevier BV, 2018-08-01)
Delayed detached eddy simulation (DDES) has been a common approach for unsteady turbulent flow problems, but it has several weaknesses which limit its use to detached flows. On the other hand, some enhancements introduced recently have made it possible to apply to attached flows as well. In the present investigation, flow with relatively low Reynolds numbers of 100, 000 and 145, 000 around NREL S826 airfoil is simulated using DDES models with two different length scale definitions: standard length scale and...
Free vertical vibration analysis of timoshenko beam suspension bridges
Kulunk, Idil; Karaesmen, Engin; Department of Engineering Sciences (1988)
Line Current Analysis for Bearing fault Detection In Induction Motors Using Hilbert Transform Phase
Oumaamar, M. E. K.; Razik, H.; Rezzoug, A.; Khezzar, A. (2011-09-10)
The present paper focuses by means of an experimental study, on the effect of a bearing fault on the stator current signatures in induction motors. The variation in the amplitude of the characteristic components is not so significant. For that and in order to depict the presence of the fault harmonic signatures, the authors used the phase analysis of Hilbert transform applied on the spectrum modulus of the line current.
Citation Formats
Ö. Zeybek and C. Topkaya, “TOP WIND STIFFENER AND SHELL INTERACTION FOR OPEN-TOP CYLINDRICAL STEEL TANKS,” 2018, Accessed: 00, 2021. [Online]. Available: https://hdl.handle.net/11511/86176.