Mechanical Properties of PLA Nanocomposites Filled with Various Polyhedral Oligomeric Silsesquioxane Structures

2018-09-20
Meyva Zeybek, Yelda
Kaynak, Cevdet
Show full item record
70
views
0
downloads
https://hdl.handle.net/11511/86240
Unverified, Conference / Seminar

Suggestions

Mechanical properties of HTPB-IPDI-based elastomers
Haska, SB; Bayramli, E; Pekel, F; Özkar, Saim (1997-06-20)
A polyurethane elastomer having mechanical and adhesive properties suitable for liner applications in solid rocket propellants was developed using HTPB as the prepolymer and IPDI as the curing agent. The effects of the NCO/OH ratio (R value) and the triol/diol ratio on the mechanical properties of the polyurethane matrix were investigated. The reaction of HTPB and IPDI is followed by monitoring the changes in the IR absorption bands of the NCO stretching at 2255 cm(-1) and the CO stretching at 1730 cm(-1). ...
Mechanical properties of conducting H-type polysiloxane-polypyrrole graft copolymers and polytetrahydrofuran-polypyrrole block copolymers
Biran, C; Toppare, Levent Kamil; Tincer, T; Yagci, Y; Harabagiu, V (2002-11-14)
The mechanical properties of block copolymers of polypyrrole and pyrrolyl-ended azobis-polytetrahydrofuran (TPPy) and graft copolymers of pyrrolyl-ended H-type polydimethylsiloxane (SPPy) were investigated and compared with those of polypyrrole (PPy), Conducting films were prepared electrochemically at a constant potential and doped with p-toluene sulfonate. (C) 2002 Wiley Periodicals, Inc.
Mechanical Behavior of ZrTa Metallic Glass Thin Films and Nanolayered Composites
Behboud, Ali; Motallebzadeh, Amir; Özerinç, Sezer (2021-04-17)
Mechanical Performance of Resol Type Phenolic Resin/Layered Silicate Nanocomposites
Tasan, C. Cem; Kaynak, Cevdet (Wiley, 2009-03-01)
Clay addition has been shown to affect polymer resins positively in terms of several physical and chemical properties, including mechanical performance, high temperature endurance and durability. These increases are limited only to relatively low concentrations of reinforcement phase, but at these low concentrations polymer/layered silicate nanocomposites (P/LS NC) have shown to exhibit higher mechanical performance than fiber reinforced polymer composites. This is among the several reasons that make P/LS N...
Mechanical properties of unsaturated polyester/montmorillonite composites
Inceoglu, AB; Yılmazer, Ülkü (2001-11-29)
Nanocomposites composed of unsaturated polyester matrix and organically modified clay filler were prepared. After the synthesis, XRD patterns showed that the interlayer spacing expanded from 1.25 nm to 4.5 nm. The mechanical properties of the nanocomposites were determined and it was found that adding only 3 w/w % organically modified clay improved the flexural modulus of unsaturated polyester by 35%. From DSC diagrams, it was found that T-g values of the nanocomposites also increased with the clay content....
Citation Formats
Y. Meyva Zeybek and C. Kaynak, “Mechanical Properties of PLA Nanocomposites Filled with Various Polyhedral Oligomeric Silsesquioxane Structures,” 2018, Accessed: 00, 2021. [Online]. Available: https://hdl.handle.net/11511/86240.
METU IIS - Integrated Information Service open@metu.edu.tr