Optimization of Locations of Voronoi Grid Points in Reservoir Simulation

Date

2015-05-27

Author

Rza Gulıyev, Ulvı
Sınayuç, Çağlar

Metadata

Show full item record

Item Usage Stats

36
views

0
downloads

URI

https://hdl.handle.net/11511/86423

Collections

Unverified, Conference / Seminar

Suggestions

OpenMETU
Core

Optimization of locations of voronoi grid points in reservoir simulation Rza Guliyev, Ulvi; Sınayuç, Çağlar; Department of Petroleum and Natural Gas Engineering (2015) Reservoir simulations are computer models that can imitate real world reservoir behavior under different circumstances, therefore making it possible for reservoir engineers to make sensitivity studies in order to assess different scenarios. These models discretize the reservoir into smaller blocks either using structured grids or unstructured grids. The application of regular structured grids to correctly map reservoir's geological structure can be very difficult, if not nearly impossible. Unstructured grid...
Optimization of physical parameters of an underactuated quadrupedal robot Karagoz, Osman Kaan; Ankaralı, Mustafa Mert (2018-01-01) In this paper, we present the comparison of different optimization algorithms that are used to optimize the parameters of a simulated legged robotic platform. We compare the results obtained by applying different algorithms on the same model and show the relative advantages and disadvantages of these algorithms. The tested algorithms are Particle Swarm Optimization, Binary Coded Genetic Algorithm, Broyden-Fletcher-Goldfrab-Shannon Algorithm and Method of Zoutendijk. We showed that the globally optimal param...
Optimization of the seismic isolation parameters for bridges Dicleli, Murat; Amiri, Shahin Nayyeri (null; 2007-11-29) Köprülerde kullanılan deprem izolatörleri, genellikle çift doğrusal yük-deplasman eğrileriyle modellenir. Bu çalışmada, deprem izolatörlerinde oluşan yük ve deplasmanı asgariye indirmek için, sismik izolasyon sistemini tanımlayan parametrelerden karakteristik mukavemetin optimizasyonunun yapılması hedeflenmiştir. Bu amaçla, öncelikle deprem izolatörlerinin optimum deplasman ve kuvvet değerlerini etkileyen parametreler belirlenmiştir. Bu çalışmada göz önüne alınan parametreler, köprü alt yapı rijitliği, sönü...
OPTIMIZATION OF PRODUCTION PARAMETERS OF ADI FOR INDUSTRY APPLİCATİONS Kalkanlı, Ali(2013-12-31) OPTIMIZATION OF PRODUCTION PARAMETERS OF ADI FOR INDUSTRY APPLİCATİONS
Optimization of macrostructure in aluminium foams Tan, Serdar; Öztürk, Tayfur; Department of Metallurgical and Materials Engineering (2003) Pure aluminium and aluminium-5wt % TiO2 aluminium foams were produced by powder metallurgy technique with the use of TiH2 as foaming agent. Two sizes of TiH2 were used: 20æm and 3æm. It has been confirmed that high level of compaction is the primary requirement in foaming. It was shown that hot swaging could be used as a method of compaction for foaming as it leads to values close to full density. Pure aluminium foamed at 675°C and 725°C leads to a volume expansion between 90-180 %. A model was developed fo...

Citation Formats

U. Rza Gulıyev and Ç. Sınayuç, “Optimization of Locations of Voronoi Grid Points in Reservoir Simulation,” 2015, vol. 1, Accessed: 00, 2021. [Online]. Available: https://hdl.handle.net/11511/86423.