Effect of Topography on Corrosion Rate and Biocompatibility of a Mg Alloy as a Biomaterial

2016-10-28
Tahmasebifar, Aydin
Kayhan, Said Murat
Koç, Muammer
Evis, Zafer
Show full item record
50
views
0
downloads
https://hdl.handle.net/11511/86620
Unverified, Conference / Seminar

Suggestions

Effect of boundary conditions and workpiece geometry on residual stresses and microstructure in quenching process
Gür, Cemil Hakan; Schuler, W (1996-11-01)
In this study, the internal and residual stress states in quenched C60 steel cylinders are analyzed both numerically and experimentally in order to investigate the effects of boundary conditions (such as quench severity and temperature of quench bath) and specimen geometry Specimen geometry has been analyzed by introducing a hole in a cylinder arid varying hole diameter and its' eccentricity. In the numerical analysis, the finite element method is applied and both temperature gradients and Phase transformat...
Effect of coating materials and mixture constituents on the permeability of concrete
Tekin, Ahmet Veli; Erdoğan, Sinan Turhan; Department of Civil Engineering (2012)
The improvement in the impermeability of concrete was studied using different methods. The main aim was to investigate impermeability improvement of concrete and to compare these methods. Two different methods were examined to investigate and compare impermeability and strength improvement of concrete by using two different sets of concrete specimens. These methods included the application of coating materials to concrete and the production of concrete using different constituent amounts and types. The firs...
Effect of Fly Ash Fineness on the Activation of Geopolymer Concrete
Aleessa Alam, Burhan; Yaman, İsmail Özgür (2012-10-05)
In the field of construction materials and particularly in concrete, cement is considered as a key element since it generates a strong and durable material through a simple hydration process. However, for many reasons (mainly economic and environmental) researchers are trying to find a new material that could replace cement or at least part of it as a binding agent in concrete. Regarding this issue, cement replacement materials like fly ash and slag have taken the lead during the last few decades. These mat...
Effect of high hydrostatic pressure on microbial load and quality parameters of grape juice
Mert, Mecnun; Alpas, Hami; Department of Food Engineering (2010)
Effect of high hydrostatic pressure (150-200-250 MPa) on the microbial load and quality parameters (pH, color, 5-hydroxymethylfurfural-HMF) of white (Sultaniye) and red (Alicante Bouschet) grape juices with combination of temperature (20-30-40°C) and holding time (5-10-15 min) was studied. Increased pressure and temperature showed significant effect on microbial reduction in white and red grape juices (p<0.05). The effect of pressure and time on pH drop was found to be insignificant (p>0.05). HHP resulted i...
Effect of tube spinning and subsequent heat treatments on strength, microstructure and residual stress state of AISI/SAE type 4140 steel
Gür, Cemil Hakan (Informa UK Limited, 2003-11-01)
In the present study, the effects of deformation percentage (23, 30, 50 and 66%) and subsequent stress relief and tempering heat treatments on the mechanical properties, residual stress state and microstructure of AISI/SAE type 4140 steel tubes manufactured by forward spinning were evaluated. Mechanical properties were determined by means of hardness and tensile tests. The tangential component of the surface residual stresses was determined by a slitting method. Plastic deformation of the metal during spinn...
Citation Formats
A. Tahmasebifar, S. M. Kayhan, M. Koç, and Z. Evis, “Effect of Topography on Corrosion Rate and Biocompatibility of a Mg Alloy as a Biomaterial,” 2016, Accessed: 00, 2021. [Online]. Available: https://hdl.handle.net/11511/86620.
METU IIS - Integrated Information Service open@metu.edu.tr