Preparation and Characterization of Perovskite Layers

Hızalan Özsoy, Gönül
Hosseini, Arezoo
Yerci, Selçuk
Çırpan, Ali
Toppare, Levent Kamil


Preparation and characterization of hydroxyapatite containing acrylic bone cements
Başgörenay, Burcu; Hasırcı, Nesrin; Department of Polymer Science and Technology (2004)
Acrylic bone cements are one of the most important biomaterials used in orthopaedic surgery and dental applications to fill the cavities or provide mechanical interlock between prosthesis and the bone. Their biocompatibility can be increased by addition of different materials into the formulation, such as hydroxyapatite. Besides all the advantages, bone cements have several drawbacks including tissue necrosis, chemical necrosis, shrinkage of the cement and aseptic loosening. Therefore painstaking research a...
Preparation and characterization of acrylic bone cements
Endoğan, Tuğba; Hasırcı, Nesrin; Department of Chemistry (2005)
Acrylic bone cements are used in dentistry and orthopedic surgery to fix prosthetic devices into the bone. Bone cements transfer and distribute the applied load and increase the load-carrying capacity of the prosthesis/cement/bone system with the help of mechanical bonding between the device and the bone. In spite of all their advantages, bone cements have several drawbacks such as insufficient mechanical properties, high exothermic polymerization temperature, release of monomer to the environmental tissue ...
Preparation and identification of perlite filled polypropylene composites
Tanrısınıbilir, Serhan; Tinçer, Teoman; Akın Öktem, Gülsu; Department of Polymer Science and Technology (1995)
Preparation and characterization of silicon thin films
Atılgan, İsmail; Katırcıoğlu, Bayram; Department of Physics (1993)
Preparation and microstructural characterization of oriented titanosilicate ETS-10 thin films on indium tin oxide surfaces
Galioglu, Sezin; Ismail, Mariam N.; Warzywoda, Juliusz; Sacco, Albert; Akata Kurç, Burcu (2010-06-01)
Oriented polycrystalline ETS-10 thin films (average thickness similar to 1.50-1.75 mu m) were prepared on the ITO glass substrates using secondary growth of ETS-10 multilayers with a partial a(b)-out-of-plane preferred crystal orientation. After secondary growth, the films showed a columnar grain microstructure, and a significantly increased degree of a(b)-out-of-plane orientation. This orientation is desirable for advanced applications of ETS-10 films. The prepared films were strongly attached to the ITO g...
Citation Formats
G. Hızalan Özsoy, A. Hosseini, S. Yerci, A. Çırpan, and L. K. Toppare, “Preparation and Characterization of Perovskite Layers,” 2015, Accessed: 00, 2021. [Online]. Available: