Investigation of Wettability of Surface Modified Polymer Wafers Used in Micro Fluidic Device Fabrication

Date

2008-11-25

Author

Baytekin, Hasan Tarık
Theısen, Janko
Schmıdt, Martın

Metadata

Show full item record

Item Usage Stats

89
views

0
downloads

URI

https://hdl.handle.net/11511/86781

Collections

Unverified, Conference / Seminar

Suggestions

OpenMETU
Core

Investigation of the performance of colloidal LiFePO4 particles in suspension flow battery Yıldız, Bayram; Aşkar, Yasemin; Coşkun, Elif; Maviş, Bora; Çınar, Simge (2021-06-12) In this study, colloidal LiFePO4 particles were synthesized through solvothermal route. Effect of solvothermal method parameters on formation of colloidal LiFePO4 was investigated. Post-processing treatments were found effective to obtain non-aggregated colloidal particles. The rheological behavior of aqueous suspensions including electroactive material was examined in terms of salt, electroactive material concentration and carbon content. A three-electrode systems was used to analyze electrochemical perfor...
Investigation of wear behavior of aged and non-aged SiC-reinforced AlSi7Mg2 metal matrix composites in dry sliding conditions ÇELİK, YAHYA HIŞMAN; Demir, Mehmet Emin; KILIÇKAP, EROL; Kalkanlı, Ali (Springer Science and Business Media LLC, 2020-01-01) Metal matrix composites (MMCs) with their splendid mechanical properties have been specifically designed for use in fields such as aerospace and aviation. The presence of hard ceramic particles in MMC increases the hardness of the matrix product and decreases its coefficient of friction. Therefore, the wear resistance is improved. Moreover, the mechanical properties of these composite materials can be improved by applying heat treatments. In this study, AlSi7Mg2 MMCs with 15 wt% SiC reinforcement were produ...
Investigation of solder materials and bond formation for wafer level packaging of mems devices Temel, Oğuzhan; Akın, Tayfun; Department of Micro and Nanotechnology (2020-10) MEMS devices are microscale systems which are fabricated using micro fabrication techniques. MEMS systems suggest many different functional devices for both military applications and consumer products. The packaging of MEMS devices is one of the most challenging parts of MEMS commercialization. Each type of MEMS device may need special operation environment. Therefore, the packaging of MEMS devices must provide required hermeticity in order to keep the special environment throughout the device's lifetime. A...
Investigation of concentration profiles in carbon nanotube production reactor Yalın, Mustafa; Özbelge, H. Önder; Department of Chemical Engineering (2009) Carbon nanotubes have received considerable attention since their discovery due to their novel properties. They have potential application areas in physics, chemistry and biology. Arc discharge, laser furnace, chemical vapor deposition and floating catalyst methods are the most commonly used methods to produce carbon nanotubes. Although carbon nanotubes have superior properties compared to other materials, they could not be used widely. The main reasons of this are that continuous and large scale production...
Investigation of sludge viscosity and its effects on the performance of a vacuum rotation membrane bioreactor KOMESLİ, Okan Tarık; Gökçay, Celal Ferdi (Informa UK Limited, 2014-03-04) Sludge characteristics of a full-scale vacuum rotation membrane (VRM) bioreactor having plate-type membranes with 0.038 m nominal pore size and 540 m(2) surface area were investigated. The VRM plant is composed of an aeration tank and a filtration chamber. The sludge floc size distribution, as determined microscopically, was mainly between 0 and 100 m in the filter chamber with very little difference in size distribution between summer (20-25 degrees C) and winter (10-15 degrees C) seasons. Small floc size ...

Citation Formats

H. T. Baytekin, J. Theısen, and M. Schmıdt, “Investigation of Wettability of Surface Modified Polymer Wafers Used in Micro Fluidic Device Fabrication,” 2008, Accessed: 00, 2021. [Online]. Available: https://hdl.handle.net/11511/86781.