Development of Tungsten or Ceria Incorporated Mesoporous Alumina Supported Nickel Catalysts for Hydrogen Production through Diesel Steam Reforming Reaction

Arslan Bozdağ, Arzu
Deniz Kaynar, Arife Derya
Sezgi, Naime Aslı
Doğu, Timur


Development of alumina supported ternary mixed matrix membranes for separation of H-2/light-alkane mixtures
Topuz, Berna; Yılmaz, Levent; Kalıpçılar, Halil (2012-10-01)
Ternary component mixed matrix membrane was prepared from PES, SAPO-34 and 2-hydroxy 5-methyl aniline on a macroporous alumina disk by the solvent evaporation method in order to investigate the effect of existence of an inorganic support. The membrane and its pure PES/Alumina counterpart were characterized by single gas permeability measurements of H-2, CH4, C2H6 and C3H8. The corresponding H-2/CH4 selectivities of membranes were 71.3 and 41. The membranes were also used to separate equimolar mixtures of H-...
Development of Ceria Alumina Supported Nickel Catalysts for Steam Reforming of Diesel
Arslan Bozdağ, Arzu; Deniz Kaynar, Arife Derya; Sezgi, Naime Aslı; Doğu, Timur (2016-06-13)
Development of cubic boron nitride (cbn) coating process for cutting tools
Cesur, Halil; Yazıcıoğlu, Yiğit; Department of Mechanical Engineering (2009)
In today’s market conditions, higher tool life and durable cutting tools which can stand high cutting speeds are required in chip removal process. In order to improve the performance of cutting tools, coatings are employed extensively. Cubic boron nitride (cBN) is a new kind of coating material for cutting tools due to its outstanding properties and testing of cBN as a hard coating for machining have been increasing in recent years. However, there are some challenges such as compressive residual stress, poo...
Development of ceria and tungsten promoted nickel/alumina catalysts for steam reforming of diesel
Bozdag, A. Arslan; Kaynar, A. D. Deniz; Doğu, Timur; Sezgi, Naime Aslı (Elsevier BV, 2019-12-01)
Use of diesel fuel for on-board hydrogen production for auxiliary power units (APUs) through diesel steam reforming (DSR) reaction is a promising route. Coke minimization for cheap and active Ni/Al2O3 catalyst is necessary for long term operation in DSR reaction. Coke minimization with high hydrogen productivity can be accomplished through the optimization of operating conditions and promoting the Ni/Al2O3 catalyst with ceria (CeO2) and tungsten (W) which attracts attention with their coke resistive propert...
Development of zeolite filled polycarbonate mixed matrix gas separation membranes
Sen, Deger; Kalıpçılar, Halil; Yılmaz, Levent (2006-11-20)
Citation Formats
A. Arslan Bozdağ, A. D. Deniz Kaynar, N. A. Sezgi, and T. Doğu, “Development of Tungsten or Ceria Incorporated Mesoporous Alumina Supported Nickel Catalysts for Hydrogen Production through Diesel Steam Reforming Reaction,” 2017, Accessed: 00, 2021. [Online]. Available: