Comparison of household refrigeration cycle design outputs using R134a and R600a as working fluids

Date

2014-05-31

Author

Bayer, Özgür
Oskay, Rüknettin

Metadata

Show full item record

Item Usage Stats

39
views

0
downloads

URI

https://hdl.handle.net/11511/87004

Collections

Unverified, Conference / Seminar

Suggestions

OpenMETU
Core

Comparison of low and high Pd loadings on CNTs via supercritical fluid deposition as hydrogen storage materials Erünal, Ebru; Ulusal, Fatma; Odabaşı, Selda; Aslan, Mustafa Yasin; Güzel, Bilgehan; Üner, Deniz (2018-04-28)
Comparison of Two-Level and Three-Level NPC Inverter Topologies for a PMSM Drive for Electric Vehicle Applications Madan, Alican; Bostancı, Emine (2019-01-01) Multidimensional comparison of two-level and three-level DC/AC converters for a 120 kW permanent magnet synchronous machine (PMSM) drive is carried out in this study. Comparison of two topologies with Sinusoidal Pulse Width Modulation (SPWM) and Space Vector Pulse Width Modulation (SVPWM) by means of output current THD, conduction and switching losses, thermal stresses on semiconductors and switching frequency limitation are investigated at various operating points. Electro-thermal simulation of both topolo...
Comparison of multi-phase interleaved boost converters with various coupled inductor topologies Gökmen, Raşit; Bostancı, Emine; Department of Electrical and Electronics Engineering (2022-2) Multi-phase interleaved boost converters are widely used in high power applications thanks to their high efficiency, high power density, increased output power capability and low input current ripple features. However, increasing the phase number results in an increase in the overall volume of the converter. In order to reduce the volume of the converter, inductors in multi-phase interleaved boost converters can be coupled. For a two-phase interleaved boost converter, loosely-coupled inductor (LCI), close-c...
Comparison of the Effects of Nonlinearities for Si MOSFET and GaN E-HEMT Based VSIs Yuruk, Huseyin; Keysan, Ozan; Ulutas, Baris (2021-07-01) Nonlinearities in voltage source inverters (VSIs) such as; dead time, switching time, delay time, voltage drops on the power switches, parasitic capacitance, etc., are considered to be the main sources of the output voltage distortions. These distortions result in low-order harmonics in the output current, which in turn increase core losses and create torque ripples. In particular, for low-speed applications with low-inductance motors, the control performance and the stability of the system degrades substan...
Comparison of single and joint effects of Zn and Cu in continuous flow and batch reactors Şengör, Sema Sevinç; Moberly, James G.; Peyton, Brent M.; Ginn, Timothy R. (2012-03-01) BACKGROUND: Microbial behavior in batch reactors may be different from that in continuous flow reactors, which is expected to affect microbial response to heavy metal exposure. Four parallel continuous flow reactors and batch growth tests were used to investigate the single and joint toxicity of Zn and Cu to Artrobacter sp. JM018.

Citation Formats

Ö. Bayer and R. Oskay, “Comparison of household refrigeration cycle design outputs using R134a and R600a as working fluids,” 2014, Accessed: 00, 2021. [Online]. Available: https://hdl.handle.net/11511/87004.