Plasma modified carbon fiber-epoxy composite systems

Download
035716.pdf
1994
Dilsiz, Nursel
Show full item record
84
views
262
downloads
Carbon fibers, Epoxy resins, Plasma polymerization
https://hdl.handle.net/11511/871
Graduate School of Natural and Applied Sciences, Thesis

Suggestions

Water dispersed epoxy resin for surface coatings
Şen, Evrim; Gündüz, Güngör; Aras, Leyla; Department of Chemical Engineering (2003)
In this research water dispersed epoxy varnishes were produced by reacting solid epoxy resin with ethylene diamine (EDA) and maleinized fatty acids of linseed oil. Maleinized fatty acid (MFA) was produced by the maleinization process, in which, fatty acid and maleic anhydride were reacted under nitrogen atmosphere. Maleinization was performed in order to insert hydrophilic groups to the fatty acid chains, which were then inserted to the backbone of the epoxy resin. This was done to give water dispersibility...
Reinforcement of epoxies by boron minerals
Babuçcuoğlu, Yurdaer; Tinçer, Teoman; Özdemir, Tonguç; Department of Polymer Science and Technology (2015)
As polymers/fillers have shown much improved mechanical and thermal properties, the subject of epoxy resin reinforcement using boron minerals fillers has become valuable subject to study. The aim of this study is how boron minerals influence epoxy resins’ mechanical and thermal properties under gamma irradiation. The effects of boron on the mechanical and thermal properties of epoxy were studied in terms of mineral type, mineral loading concentration and irradiation dose in air and under vacuum. Bisphenol-A...
Cold plasma-bunched beam interaction plasma wake field accelerator case
Rhimi, Mohamed Nazih; Bilikmen, Kadri Sinan; Department of Physics (1991)
Pressure, gas ratio and operation voltage optimization of a helium-neon laser
Bilgili, Hulusi Birol; Esendemir, Akif; Department of Physics (2005)
Aim of this thesis is to investigate the optimum working parameters of a helium-neon laser. Partial pressure ratios, total pressures of the gases and voltage-current characteristics were studied. The analysis of the results includes the minor factors (impurity, volume, etc.) and their effects to main parameters (laser power, voltage, current). Tables, which were formed by measured optical parameters as wavelength and power, converted to graphs and from these graphs optimal working conditions for the laser a...
Vibration damping behavior of epoxy matrix composites reinforced with carbon fibers and carbon nanotubes
Avil, Esma; Kaynak, Cevdet; Department of Metallurgical and Materials Engineering (2019)
The main objective of this study was to investigate contribution of the nonfunctionalized multi-walled carbon nanotubes (CNT) on the vibration damping behavior of first neat epoxy resin and then unidirectional and bidirectional continuous carbon fiber (CF) reinforced epoxy matrix composites. Epoxy/CNT nano-composites were produced by ultrasonic solution mixing method, while the continuous CF reinforced composite laminates were obtained via resin-infusion technique. Vibration analysis data of the specimens w...
Citation Formats
N. Dilsiz, “Plasma modified carbon fiber-epoxy composite systems,” Ph.D. - Doctoral Program, Middle East Technical University, 1994.
METU IIS - Integrated Information Service open@metu.edu.tr