Katı killerde rezidüel kayma dayanımı

2012-10-04
Huvaj Sarıhan, Nejan
Show full item record
36
views
0
downloads
https://hdl.handle.net/11511/87342
https://www.zmgm.org.tr/yayinlar/7019/ZM-14.html
https://www.zmgm.org.tr/yayinlar/1016/zemin-mekanigi-ve-geoteknik-muhendisligi-konferanslari-zmgm.html
Zemin Mekaniği ve Temel Mühendisliği 14. Ulusal Kongresi, 4-5 Ekim 2012
Department of Civil Engineering, Conference / Seminar

Suggestions

Nonlinearity of the residual shear strength envelope in stiff clays
Maghsoudloo, Arash; Huvaj Sarıhan, Nejan; Department of Civil Engineering (2013)
During shearing of stiff clays, plate-shaped clay particles are parallel-oriented in the direction of shear reaching the minimum resistance of “residual shear strength”. The residual shear strength envelopes of stiff clays are curved, but for practical purposes represented by linear envelopes. This study investigates the nonlinearity of the residual shear strength envelope using experimental evidence (i) from laboratory reversal direct shear tests on two stiff clays (Ankara clay and kaolinite) at 25 to 900 ...
Experimental study of solid propellant combustion instability
Çekiç, Ayça; Ulaş, Abdullah; Department of Mechanical Engineering (2005)
In this study, experimental investigation of solid propellant combustion instability using an end burning T-Burner setup is performed. For this purpose, a T-Burner setup is designed, analyzed, constructed and tested with all its sub components. T-Burner setup constructed is mainly composed of a base part, a control panel and the T-Burner itself. Combustion chamber, pressure stabilization mechanism, pressurization system, measurement instruments and data acquisition systems form the T-Burner. Pressure stabil...
Optimum design of slurry pipelines
Yıldız, Burhan; Altan Sakarya, Ayşe Burcu; Department of Civil Engineering (2009)
There exist various applications of transportation of slurries through pipelines all over the world. In the present study, the problem is formulated as a "transportation problem" to determine the pipe diameters and amounts of slurry to be transported from the demand (production) points to the processing (factory) points. The minimization of the cost consisting of the pipe and energy cost terms is considered as the objective function to determine the stated decision variables. Pipe cost is given as the funct...
A Density functional theory investigation for solid state hydrogen storage materials
Gencer, Ayşenur; Toffoli, Hande; Department of Physics (2018)
The world’s energy demand is increasing with the population growth and technology development. In addition, the electronic devices are an essential part of the daily life that require portable energy sources. Therefore, energy storage is necessary in order to store energy from the renewable energy sources and also provide portable energy sources for electronic devices. Hydrogen being the most abundant element in the world, is a good energy carrier with high energy density. Also, hydrogen does not release gr...
Katı hal gaz algılayıcılarında manyetik geçirgenlik tekniğinin uygulanması
Bekteseviç, Selma; Karakaş, Gürkan; Severcan, Işıl(2001)
Karbonmonoksit,NOx,hidrokarbonlar gibi atmosferik kirleticilerin derişimlerinin ölçülmesi hava kirliliğinin önlenmesi ve yanma sistemlerinin performanslarının arttırılması gerekliliği gibi nedenlerle giderek önem kazanmaktadır. Katı hal gaz algılayıcıları automotiv,sabit kaynaklı kirleticileri, yangın önleme ve savunma sanayinde yaygın olarak kullanılmaktadır. Katı hal gaz algılayıcılarında kullanılan temel prensip bir heterojen katalizör yüzeyi ile gaz molekülleri arasında gerçekleşen kimyasal ve elektriks...
Citation Formats
N. Huvaj Sarıhan, “Katı killerde rezidüel kayma dayanımı,” Isparta, Turkey, 2012, vol. 1, p. 1, Accessed: 00, 2021. [Online]. Available: https://hdl.handle.net/11511/87342.
METU IIS - Integrated Information Service open@metu.edu.tr