Alumina destekler üzerinde MFI tipi zeolit membran sentezi

Date

2013-07-26

Author

Çulfaz Emecen, Pınar Zeynep
Kalıpçılar, Halil

Metadata

Show full item record

Item Usage Stats

107
views

0
downloads

URI

https://hdl.handle.net/11511/87447

Collections

Unverified, Conference / Seminar

Suggestions

OpenMETU
Core

Microstructural origins of strain heterogeneity in formability of aluminum alloys Güler, Baran; Efe, Mert; Department of Metallurgical and Materials Engineering (2019) In forming of sheet metals, strain localizations and subsequent necking are generally induced by geometrical imperfections, such as local thickness variations. Microstructural heterogeneities also take role in strain localizations, yet their influence is neglected when concerning the macro-scale formability. This thesis investigated the effects of microstructural features on the strain localization behavior of aluminum alloys. A small-scale biaxial test device and sample were utilized for this purpose. The ...
Experimental and theoretical investigations on alumina-water nanofluid viscosity with statistical analysis Elçioğlu, Elif Begüm; Güvenç Yazıcıoğlu, Almıla; Department of Mechanical Engineering (2013) Nanofluids are nanoparticles’ colloidal suspensions. Due to their enhanced thermal conductivity, nanofluids are regarded as advantageous for high efficiency requiring heat transfer applications. On the other hand, the viscosity of nanofluids is greater than those of base fluids. Since the pumping power requirement, which is related to operation cost, is higher for high viscosity fluids, the viscosity of nanofluids should be carefully investigated. Enhancements in nanofluid thermophysical properties are rela...
Improvement of impact resistance of aluminum and zinc based die cast parts by means of tool steel inserts Kamberoğlu, Murat; Kalkanlı, Ali; Department of Metallurgical and Materials Engineering (2011) High Pressure Die Casting (HPDC) is low-cost technique for the mass production of complex, non-ferrous parts. Despite its benefits such as dimensional accuracy, surface quality and high production rate; some mechanical drawbacks limit use of HPDC in production of critical parts especially under dynamical loads. This study aims to improve impact resistance and surface hardness of die cast parts by means of tool steel inserts. These inserts act as a barrier between the impactor and die casting alloy, in order...
Low velocity ballistic impact behaviour of the Al-matrix composites Kaya, Seyfi; Ögel, Bilgehan; Yıldırım, Orhan; Department of Metallurgical and Materials Engineering (2002) In this study, a drop-weight set-up was used for low velocity ballistic behaviour of various materials. The test includes the free fall of 5 kg hammer from a height of 4 m and impacting the specimen with a 8 mm diameter punching rod. The criteria in the test is penetration/no penetration as well as the failure mechanism in the tested specimen. The test materials were selected as Ck67 steel, pure Al, and AI-B4C composites. The Ck67 steel plate was quenched and tempered to yield UTS of 800 MPa and higher. Al-...
An investigation of the microstructural and mechanical properties of tri-calcium phosphates doped with aluminum and fluoride ions Tahmasebifar, Aydin; Evis, Zafer; Department of Engineering Sciences (2011) The aim of this study was to investigate the microstructure and mechanical properties of pure tricalcium phosphate (TCP) and tricalcium phosphates doped with aluminum (Al3+) and fluoride (F-) ions at different compositions. TCP was synthesized via precipitation method and sintered at 1100C for 1 and 5 h. It was observed that density and relative density of the sintered materials were decreased by extending the sintering time. Increased densities were achieved upon Al3+ and/or F- doping. For structural anal...

Citation Formats

P. Z. Çulfaz Emecen and H. Kalıpçılar, “Alumina destekler üzerinde MFI tipi zeolit membran sentezi,” 2013, Accessed: 00, 2021. [Online]. Available: https://hdl.handle.net/11511/87447.