Material Characterization of Amorphous Molybdenum Oxide Thin Films

Güllü, Hasan Hüseyin
Bayraklı, Özge
Terlemezoğlu, Makbule
Parlak, Mehmet


Material Performance of Co3O4 CeO2 and Co Ce Mixed Oxide on Oxygen Storage for Solar Thermal Hydrogen Production
Çalışan, Atalay; Kaya, Denız; Üner, Deniz (null; 2015-08-30)
Material characterization with terahertz time-domain spectroscopy
Köseoğlu, Devrim; Bilikmen, Kadri Sinan; Department of Physics (2010)
Terahertz time-domain spectroscopy systems were developed and used for the anaylsis and characterization of various materials. By using ultra-fast Ti:Sapphire and Er-doped fiber lasers, terahertz time-domain spectrometers of different configurations were constructed and tested. To increase the accuracy and sensitivity of the measurements, the systems were optimized for spectroscopic analysis. MBE grown nominally undoped epitaxial GaAs samples were used for the spectroscopic measurements. These samples were ...
Material Characterization of Mudbrick and Neighbouring Plasters in Traditional Timber Framed Structures
Erdil, Meltem; Madani, Nigar; Alam, Burhan; Tavukçuoğlu, Ayşe (null; 2017-07-06)
The 19th century timber dwellings reflect the experience of the past on materials and construction technologies of the traditional timber frame structures in Anatolia. However, those houses suffer mostly from wrong repairs due to incompatible materials and inappropriate construction detailing. Wrong repairs introduce and/or accelerate many problems, such as moisture problems, salt decay, thermal and structural failures. Comprehensive studies are, therefore, needed to improve the knowledge for the planning o...
Material requirements planning implementation for a foundry.
Talu, Selim; Department of Industrial Engineering (1985)
Material flow control in high pressure sheet metal forming of large area parts with complex geometry details
Trompeter, M; Onder, E; Homberg, W; Tekkaya, E; Kleiner, M (2005-12-01)
Working media based forming processes show advantages compared to the conventional deep drawing in the range of sheet metal parts with complex geometry details. By High Pressure Sheet Metal Forming (HBU), complex parts can be formed with reduced tool costs, fewer process steps, and improved part properties, particularly by the use of high strength steels. In order to use these advantages to full capacity, the material flow into the area of the geometry details needs to be optimised. The key element for the ...
Citation Formats
H. H. Güllü, Ö. Bayraklı, M. Terlemezoğlu, and M. Parlak, “Material Characterization of Amorphous Molybdenum Oxide Thin Films,” 2018, Accessed: 00, 2021. [Online]. Available: