Effect of Laser Parameters on Rear Contact Formation and Passivation of PERC Type Silicon Solar Cells

2018-09-28
Genç, Ezgi
Türkay, Deniz
Kökbudak, Gamze
Semiz, Emel
Es, Fırat
Yerci, Selçuk
Turan, Raşit

Suggestions

Effect of electroless etching parameters on the growth and reflection properties of silicon nanowires
Ozdemir, Baris; Kulakci, Mustafa; Turan, Raşit; Ünalan, Hüsnü Emrah (IOP Publishing, 2011-04-15)
Vertically aligned silicon nanowire (Si NW) arrays have been fabricated over large areas using an electroless etching (EE) method, which involves etching of silicon wafers in a silver nitrate and hydrofluoric acid based solution. A detailed parametric study determining the relationship between nanowire morphology and time, temperature, solution concentration and starting wafer characteristics (doping type, resistivity, crystallographic orientation) is presented. The as-fabricated Si NW arrays were analyzed ...
Effect of magnetic field and gamma irradiation on the electrical properties and structure of the Tl-based ceramic superconductors
Ozkan, H; Hasanlı, Nızamı; Kayed, T (IOP Publishing, 2000-02-01)
The voltage-current (V-I) characteristics, critical temperatures and the critical currents of Tl2Ba2CaCu2O8 (Tl-2212) and Tl2Ba2Ca2Cu3O10 (Tl-2223) ceramic superconductors were studied in magnetic fields up to 80 mT after several gamma irradiations up to 100 MR. The effect of gamma irradiation on the structure of these materials has also been studied. The normal state resistance increases by 20-30% with gamma irradiation, most of the changes taking place in low gamma doses up to 10 MR. The critical temperat...
Effect of magnetic field, temperature and gamma irradiation on electrical and structural properties of thallium-based superconductors
Topal, Uğur; Özkan, Hüsnü; Department of Physics (1997)
EFFECT OF SURFACE ROUGHNESS IN PARALLEL-PLATE MICROCHANNELS ON HEAT TRANSFER
Turgay, M. B.; Güvenç Yazıcıoğlu, Almıla (Informa UK Limited, 2009-01-01)
In this study, the effect of surface roughness on convective heat transfer in two-dimensional parallel plate microchannels is analyzed numerically for steady-state, single-phase, developing, and laminar air flow in the slip flow regime. Slip velocity and temperature jump at wall boundaries are imposed to observe the rarefaction effect. The effect of triangular roughness elements on Nusselt number are compared to cases with smooth surfaces. The results indicate that increasing surface roughness reduces heat ...
Effect of heat treatment on microstructural and mechanical properties of molybdenum based PM ferrous alloys
Davoudnezhad, Ramona; Ögel, Bilgehan; Durlu, Nuri; Department of Metallurgical and Materials Engineering (2016)
In this study, the effect of different heat treatment processes on microstructural and mechanical properties of Distaloy-DH and Astaloy Mo (Fe-2Cu-1.5Mo) powders are investigated. Powder samples are sintered at 1120°C for 45 minutes in a sintering furnace under reducing atmosphere of: 10% H2 + 90% N2. After sintering, secondary heat treatments are performed on samples. Microstructural characterization of samples is done with optical and electron microscopy. Selective etching is utilized for determining the ...
Citation Formats
E. Genç et al., “Effect of Laser Parameters on Rear Contact Formation and Passivation of PERC Type Silicon Solar Cells,” 2018, Accessed: 00, 2021. [Online]. Available: https://hdl.handle.net/11511/87577.