Effects of particle density and gas inlet diameter on particle velocity, solids hold-up and flux distributions in conical spouted beds with high density particles

Date

2017-10-01

Author

Golshan, Shahab
Yeniceri, Ali
Zarghami, Reza
Mostoufi, Navid
Köksal, Murat
Külah, Görkem

Metadata

Show full item record

Item Usage Stats

81
views

0
downloads

URI

https://hdl.handle.net/11511/87724
http://wcce10.org/index.php/abstract-book

Collections

Department of Chemical Engineering, Conference / Seminar

Suggestions

OpenMETU
Core

Effects of mean flow and temperature on acoustic liner performance in dual stream flow ducts Özyörük, Yusuf (2009-12-01) This paper investigates effects of mean flow and temperature on acoustic liner performance in dual stream flow ducts using solutions from a linearized Euler solver, which are verified with and an approximate eigenmode/mode matching technique. A simple, uniform, long cowl duct configuration with partial liner treatment on the outer wall exposed to the cold stream is studied in the present investigation. While the linearized Euler solver uses a Reynolds-Averaged Navier-Stokes solution as the mean flow, the ei...
Effects of delay period and maximum temperature period on compressive strength of steam cured concrete Erdem, Tahir Kemal; Erdoğan, Turhan Y.; Turanlı, Lütfullah; Department of Civil Engineering (2000)
Effects of current density, coating thickness, temperature, pH and particle concentration on internal stress during Ni-MoS2 electrocodeposition Guler, E. Saraloglu; Karakaya, İshak; KONCA, ERKAN (2014-02-01) Internal stress in plated deposits has been a common problem that may affect the functionality of coatings. Electrodeposition parameters and insoluble particles modify the characteristics and the level of internal stress of coatings. The influence of the electrocodeposition parameters and their interaction effects on the internal stress during the electrodeposition of Ni and Ni-MoS2 composite coatings were studied by fractional factorial design. The parameters studied and their ranges were: MoS2 particle co...
EFFECTS of ROTATION of MATERIAL AXES ON FREE FLEXURAL VIBRATIONS of CENTRALLY BONDED SYMMETRIC DOUBLE DOUBLER JOINT in COMPOSITE MINDLIN PLATES or PANELS Yuceoglu, U.; Guvendik, O. (2011-11-17) The present study investigates the serious effects of rotation of material axes on the free dynamic response of composite plates or panels with "Bonded Double Doubler Mint Systems". The "Plate Adherends" and the "Upper and Lower Doubler Plates" are connected through the relatively very thin adhesive layers. The "Bonded Double Doubler Joint System" is considered in taans of the "System. 1" and the "System.2". In the "System. 1", the material directions of "Plate Adherends" are rotated 90(0) (about z-axis) wh...
EFFECTS of POSITION (or LOCATION) of NON-CENTRALLY BONDED SYMMETRIC DOUBLE LAP JOINT (or SYMMETRIC DOUBLE DOUBLER JOINT) on BENDING VIBRATIONS of COMPOSITE MINDLIN PLATES or PANELS Yuceoglu, U.; Guvendik, O. (2010-11-18) In the present study, the "Effects of Position (or Location) of Non-Centrally Bonded Symmetric Double Doubler Joint in Composite Mindlin Plates or Panels" are theoretically analyzed and are numerically solved in some detail. The "Plate Adherends" and the upper and lower "Doubler Plates" of the "Bonded Joint System" are considered as dissimilar, orthotropic "Mindlin Plates" joined through the dissimilar upper and lower very thin adhesive layers. The transverse and rotary moments of inertia are included in th...

Citation Formats

S. Golshan, A. Yeniceri, R. Zarghami, N. Mostoufi, M. Köksal, and G. Külah, “Effects of particle density and gas inlet diameter on particle velocity, solids hold-up and flux distributions in conical spouted beds with high density particles,” 2017, Accessed: 00, 2021. [Online]. Available: https://hdl.handle.net/11511/87724.