Alçak Geçiren Aktif Filtreler İçin Eleman Değerlerinin Seçiminde Yeni Bir Yaklaşım: Tabu Araştırma Algoritması

2003-11-01
Kalınlı, Adem
Show full item record
49
views
0
downloads
https://hdl.handle.net/11511/87754
IĞDIR ÜNİVERSİTESİ FEN BİLİMLERİ ENSTİTÜSÜ DERGİSİ
Unverified, Article

Suggestions

Predicting actual load demand in distribution systems with high PV penetration
Yıldız, Ufuk; Göl, Murat; Department of Electrical and Electronics Engineering (2019)
Because of the increasing environmental concerns, governmental incentives and developing photovoltaic (PV) technology, PV systems have become increasingly popular in recent years. Despite the environmental and economic benefits of PV systems, installation of high number of PV systems brings new challenges in power system operation and management. Due to high number of PV systems at low voltage distribution systems and the computational load of communication and data analysis, the amount of power generated b...
Improvement of mechanical and flame retardancy properties of biocomposites based on low density polyethylene and polylactic acid
Altun, Yasemin; Bayramlı, Erdal; Doğan, Mehmet Onur; Department of Polymer Science and Technology (2015)
The main objective of this study was to improve the mechanical and flame retardant properties of low density polyethylene (LDPE) and poly (lactic acid) (PLA) based biocomposites. Wood flour (WF) and jute fabric were used as the fillers. In the mechanical property improvement studies with LDPE, the effect of two compatibilizing agents MA (random terpolymer of ethylene, acrylic ester and maleic acid) and GMA (random terpolymer of ethylene, acrylic ester and glycidyl metacrylate) functionalized polymers at dif...
Overvoltage protection of low voltage systems
Shareef, Hussain; Özay, Nevzat; Department of Electrical and Electronics Engineering (2002)
Any switching action or lightning stroke on a transmission system causes excessive voltage, which are propagated to the electrical equipment used. The withstand capability of the electrical equipment to these overvoltages is dependent on the rate of rise, peak value and the duration of these overvoltages and are especially critical to information technology (IT) equipment. Whenever there is a probability of these overvoltages appearing across the electrical equipment, they should be limited to a safe value ...
Design of kalman filter based attitude determination and control algorithms for a LEO satellite
Efendioğlu, Gamze; Leblebicioğlu, Mehmet Kemal; Department of Electrical and Electronics Engineering (2019)
The design of different attitude controllers by using reaction wheels and magnetic rods as torque sources and the design of a multi-sensor integrated navigation system are developed for a three-axis stabilized Earth-orbiting microsatellite and presented in this thesis. Firstly, the fundamental parameters relevant to satellite attitude determination are presented, such as attitude sensors and actuators, space environmental effects, coordinate frames, satellite dynamic/kinematic equations with control compone...
Leo satellites : dynamic modelling, simulations and some nonlinear attitude control techniques
Karataş, Soner; Kocaoğlan, Erol; Department of Electrical and Electronics Engineering (2006)
In this thesis nonlinear control method techniques are investigated to control the attitude of Low Earth Orbit satellites. Nonlinear control methods are compared with linear control methods. Simulations are done using Matlab and Simulink software and BILSAT-1 parameters are used in the simulations. Reaction wheels are used as the actuator.
Citation Formats
A. Kalınlı, “Alçak Geçiren Aktif Filtreler İçin Eleman Değerlerinin Seçiminde Yeni Bir Yaklaşım: Tabu Araştırma Algoritması,” IĞDIR ÜNİVERSİTESİ FEN BİLİMLERİ ENSTİTÜSÜ DERGİSİ, pp. 567–576, 2003, Accessed: 00, 2021. [Online]. Available: https://hdl.handle.net/11511/87754.
METU IIS - Integrated Information Service open@metu.edu.tr