Reshaping of Sound Fields Inside Acoustically Structurally Coupled Enclosed Spaces By Helmholtz Resonators

1999-01-01
Next Generation CAD & Modelling Technique in Concurrent Design of JSME

Suggestions

Reshaping human intentions by autonomous sociable robot moves through intention transients generated by elastic networks considering human emotions
Görür, Orhan Can; Erkmen, Aydan Müşerref; Department of Electrical and Electronics Engineering (2014)
This thesis focuses on reshaping a previously detected human intention into a desired one, using contextual motions of mobile robots, which are in our applications, autonomous mobile 2-steps and a chair. Our system first estimates the current intention based on human trajectory depicted as location and detects body-mood of the person based on proxemics behaviors. Our previous reshaping applications have shown that the current human intention has to be deviated towards the new desired one in phases according...
Reshaping human intention in Human-Robot Interactions by robot moves A comparative analysis of HMM and OOM methods
Durdu, Akif; Erkmen, Aydan Müşerref; Yilmaz, Alper (John Benjamins Publishing Company, 2019-01-01)
This paper outlines the methodology and experiments associated with the reshaping of human intentions based on robot movements within Human-Robot Interactions (HRIs). Although studies on estimating human intentions are well studied in the literature, reshaping intentions through robot-initiated interactions is a new significant branching in the field of HRI. In this paper, we analyze how estimated human intentions can intentionally change through cooperation with mobile robots in real Human-Robot environmen...
Reconfigurable antennas using RF-MEMS research in Turkey
Aydın Çivi, Hatice Özlem; Demir, Şimşek; Akın, Tayfun (2011-06-10)
A review of the on-going research in Turkey, -in Middle East Technical University (METU)-, on tunable microwave components and reconfigurable antennas produced by RF MEMS technology is presented in this paper. As a key element of reconfigurable structures, several capacitive contact shunt RF MEMS switches are designed, fabricated and measured. Lifetime measurements show that these switches can operate more than 3.2 billion cycles with a bipolar actuation without any degradation in performance. Design and me...
Strengthening of deficient RC frames with high strength concrete panels: an experimental study
BARAN, MEHMET; Susoy, Melih; Tankut, Tugrul (2011-01-25)
An economic, structurally effective and practically applicable strengthening technique was developed for reinforced concrete (RC) framed buildings. The idea of the technique is to convert the existing hollow brick infill wall into a load carrying system acting as a cast-in-place RC infill wall by bonding relatively thin high strength precast concrete PC panels to the plastered hollow brick infill. For this purpose, a total of eight one-third scale, one bay, one story frames were tested under reversed-cyclic...
Disintegration of Sludge by Sonication and Improvement of Methane Production Rates in Batch Anaerobic Digesters
Zorba, Gozde T.; Sanin, Faika Dilek (2013-04-01)
Sludge pretreatment prior to anaerobic digestion has been found to reduce sludge production in wastewater treatment. Sludge disintegration using physical, chemical, biological, or mechanical methods can increase biogas production and reduce sludge quantities. Ultrasonication is one of the most effective means of mechanical disintegration. This study aims to investigate ultrasonication as a means for solubilizing waste activated sludge (WAS) to enhance its digestability. Sonication was applied by the use of ...
Citation Formats
A. Sorguç, “Reshaping of Sound Fields Inside Acoustically Structurally Coupled Enclosed Spaces By Helmholtz Resonators,” Next Generation CAD & Modelling Technique in Concurrent Design of JSME, pp. 9–15, 1999, Accessed: 00, 2021. [Online]. Available: https://hdl.handle.net/11511/88057.