Mathematical methods for correcting absorption and enhancement effects in x-ray fluorescence analysis

Download
001310.pdf
1987
Yazıcı, İsmail
Show full item record
69
views
0
downloads
https://hdl.handle.net/11511/8817
Graduate School of Natural and Applied Sciences, Thesis

Suggestions

Mathematical modeling of nox emissions in bubbling fluidized bed combustors
Afacan, M. Onur; Selçuk, Nevin; Department of Chemical Engineering (2005)
A comprehensive model, previously developed and tested for prediction of behavior of continuous fluidized bed combustors is extended to incorporate NOx formation and reduction reactions and applied to the simulation of METU 0.3 MWt Atmospheric Bubbling Fluidized Bed Combustor (ABFBC) burning lignites with high volatile matter in their own ashes. The predictive accuracy of the model was assessed by comparing its predictions with measurements taken previously on the same rig. Favorable comparisons are obtaine...
Mathematical Modeling of 1, 3-Butadiene Polymerization Initiated by Hydrogen Peroxide
Mahmoudian, Mehdi; Nosratzadegan, Keyvan; Ghasemıkouchameshgı, Mahmoud; Shokri, Aref (2020-09-01)
In this study, the modeling of polymerization of 1, 3-butadiene in the presence of hydrogen peroxide has been reported for the first time. For this purpose, the Method of double moments was applied. The modeling has been performed to investigate the effect of reaction condition on the properties of synthesized Polybutadiene, and the role of kinetic coefficients on the output of model i.e. sensitivity analysis. A comprehensive kinetic model was developed based on previous experimental studies. Then, the mome...
Mathematical Modeling of the NOTAR Antitorque System for Flight Simulation
Yavrucuk, İlkay; Uzol, Oğuz (2013-04-01)
In this paper, a mathematical model of a helicopter NO TAil Rotor (NOTAR) antitorque system is developed for real-time flight simulations. The model consists of the circulation control tail boom, direct jet thruster, and the vertical stabilizers. The airflow inside the tail boom is modeled by dividing the flow into aerodynamic control volumes. The model features a bladeelement-type approach for modeling the mass flow through the axial fan blades as well as aerodynamic mass and momentum conservation calculat...
Mathematical simulation for predicting the size distribution of pilot scale AG/SAG mill product.
Bodur, Numan Kalbitemiz; Hoşten, Çetin; Department of Mining Engineering (1998)
Mathematical modeling of adsorption/desorption systems for chemical heat pumps
Yurtsever, Ahmet Onur; Uludağ, Yusuf; Karakaş, Gürkan; Department of Chemical Engineering (2011)
Despite their limited commercial applications, chemical heat pumps (CHP) have been considered as an important alternative to conventional heating and cooling technologies. In this study, the adsorption-desorption of ethanol over activated carbon was applied on the CHP reactor. The ethanol vapor - activated carbon adsorption rate was determined at 30, 60, 90 and 120° experimentally by using Intelligent Gravimetric Analyzer C(IGA). The experimental adsorption data were used on the transient modeling of reacto...
Citation Formats
İ. Yazıcı, “Mathematical methods for correcting absorption and enhancement effects in x-ray fluorescence analysis,” Middle East Technical University, 1987.
METU IIS - Integrated Information Service open@metu.edu.tr