Uranium dioxide production by sol-gel technique.

1989
Durmazuçar, Hasan H.
Show full item record
60
views
0
downloads
https://hdl.handle.net/11511/8828
Graduate School of Natural and Applied Sciences, Thesis

Suggestions

Ion implantation and deposition on the inner surfaces of cylinders by exploding metallic foils
Demokan, O (2000-10-01)
A novel scheme for ion deposition and possibly ion implantation on the inner surfaces of cylindrical targets is proposed and experimentally tested. A large current is passed through a coaxial table-type structure, composed of a straight conductor and a thin metallic foil, surrounding it. The foil evaporates and ionizes forming a metallic plasma, which is pushed radially outward due to the pressure of the magnetic field, confined to the region between the plasma and the conductor. The ions of the foil materi...
Ion implantation in confined, pinching metallic plasmas
Demokan, O; Marji, E (1999-02-15)
A series of preliminary experiments have been carried out to obtain a metallic arc discharge, in the form of an annular cylindrical column, carrying a current in the axial direction. To assert this geometry, a ring-shaped cathode is adopted and an arc formation is triggered by heating the cathode externally. The plasma, initially in the form of a cylindrical shell, is seen to be confined and pinched by its own magnetic field. The resulting, radially inward flux is observed to produce efficient and multidire...
Thermal imaging based on mechanical vibrations
Yılmaz, Şener; Azgın, Kıvanç; Department of Mechanical Engineering (2022-8-19)
The thesis proposes a digital, resonance readout method based on a lock-in based digital phase locked loop (DPLL) mechanism, which is designed, simulated, implemented and tested using a Xilinx made Field Programmable Gate Array (FPGA). Implementation is performed using a hardware descriptive language (VHDL) on low level. Certain digital signal processing algorithms such as lock-in detection, DPLL, DDS and CORDIC are implemented, simulated and tested. Moreover, the design is shown to be capable of resonating...
Nickel titanium alloys as orthodontic archwires: A narrative review
Uysal, Idil; Yilmaz, Bengi; Atilla, Aykan Onur; Evis, Zafer (2022-12-01)
Nickel-titanium (NiTi) archwires have been widely used in orthodontic treatments at the aligning and leveling step which is the initial stage of the treatment. This review presents the concepts related to NiTi archwires from the materials science and engineering perspective. Analysis of the research profile showed that mechanical properties as a research topic constituted 25.9 % of the research articles published in last two decades. The effects of processing parameters, stress and temperature on phase tran...
Aluminum Oxide and Titanium Diboride Reinforced Metal Matrix Composite and Its Mechanical Properties
Kurtoğlu, Aziz; Sevinç, Naci; Department of Metallurgical and Materials Engineering (2004)
This study is on the production and testing of an aluminum metal matrix composite. Metal Matrix Composites can be produced in several different ways. In this study, an aluminum matrix composite is produced by direct addition of the reinforcement ceramic into the liquid metal. The ceramic reinforcement for this process was a mixture of TiB2 and Al2O3 which was produced by means of a thermite reaction of reactants Al, B2O3 and TiO2 all in powder form with their respective stoichiometric amounts. This ceramic ...
Citation Formats
H. H. Durmazuçar, “Uranium dioxide production by sol-gel technique.,” Middle East Technical University, 1989.
METU IIS - Integrated Information Service open@metu.edu.tr