Joint modeling of mean and dispersion of the multivariate laplace distribution

Date

2020-12-21

Author

ARSLAN, OLÇAY
GÜNEY, YEŞİM
Gökalp Yavuz, Fulya

Metadata

Show full item record

This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

Item Usage Stats

170
views

0
downloads

URI

http://www.cfenetwork.org/CFE2020/docs/BoACFECMStatistics2020.pdf?20201211020028
https://hdl.handle.net/11511/91159

Conference Name

13th International Conference of the ERCIM WG on Computational and Methodological Statistics

Collections

Department of Statistics, Conference / Seminar

Suggestions

OpenMETU
Core

Joint utilization of local appearance and geometric invariants for 3D object recognition Soysal, Medeni; Alatan, Abdullah Aydın (2015-04-01) This article introduces a novel method for 3D object recognition, which utilizes well-known local features in a more efficient way, without any reliance on partial or global planarity. Geometrically consistent local features, which form the crucial basis for object recognition, are identified using affine 3D geometric invariants. The utilization of 3D geometric invariants replaces the classical 2D affine transform estimation/verification step, and provides the ability to directly verify 3D geometric consist...
Joint trajectory methods for a manipulator and applications for stanford manipulator Öcal, İsmail; Kocaoğlan, Erol; Department of Electrical and Electronics Engineering (1990)
JOINT OPTIMIZATION OF TRANSMIT AND RELAY BEAMFORMER FOR SINGLE GROUP MULTICAST TRANSMISSION Demir, Özlem Tuğfe; Tuncer, Temel Engin (2015-09-04) In this paper, single group multicasting is considered for the cooperative relay network. Two-phase transmission is performed and amplify-and-forward relay protocol is used. In the first phase, the base station broadcasts the common signal to the single antenna relays by employing beamforming. Each relay multiplies its received signal by a complex weight and retransmits it to the single antenna users. The aim is to find the beamformer weights at the base station and the relays jointly to minimize the total ...
Joint precoder and decoder design in multiuser downlink MIMO communications for common, private and common+private information transmission Deniz, Umay Ezgi; Candan, Çağatay; Department of Electrical and Electronics Engineering (2017) The joint precoder/ decoder design in the multiuser downlink multi-input-multioutput (MU-MIMO) communication problem is investigated under three different scenarios. In the first scenario, the same information denoted as common information is delivered to all users, i.e. multicasting scenario. In the second scenario, the base station (BS) transmits independent information bits (private information) to the users, i.e. the conventional communication scenario. Finally, in the third scenario, the BS concurrentl...
Unified assessment of stress scaling factors for liquefaction engineering problems Çetin, Kemal Önder (2014-01-01) Most of the widely used seismic soil liquefaction triggering methods propose cyclic resistance ratio (CRR) values valid at a reference normal effective stress (σv,0) of one atmosphere, and a zero static shear stress (τst,0) state. Then a series of correction factors are applied to the CRR to account for the effects due to variations from the reference normal effective and static shear stresses (i.e., Kσ and Kα corrections). In the literature exists a number of stress correction factors used for seismic soil...

Citation Formats

O. ARSLAN, Y. GÜNEY, and F. Gökalp Yavuz, “Joint modeling of mean and dispersion of the multivariate laplace distribution,” İngiltere, 2020, vol. 1, Accessed: 00, 2021. [Online]. Available: http://www.cfenetwork.org/CFE2020/docs/BoACFECMStatistics2020.pdf?20201211020028.