Effect of Stress-Strain Profile on Bulk Thermal Conductivity

Date

2021-03-19

Author

Günay, Ahmet Alperen
Shiomi, Junichiro

Metadata

Show full item record

This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

Item Usage Stats

81
views

0
downloads

URI

https://hdl.handle.net/11511/92586

Conference Name

American Physical Society, APS March Meeting 2021

Collections

Department of Mechanical Engineering, Conference / Seminar

Suggestions

OpenMETU
Core

Effect of cooling rate on microstructure and high temperature stability of rapidly solidified Al-Fe-V-Si alloys Kalkanlı, Ali (Informa UK Limited, 1999-01-01) Recently, AI-Fe-V-Si alloys have received more attention owing to their high temperature stability associated with vanadium rich precipitates and silicides. In this work, a series of alloys was prepared and processed by melt spinning and gas atomisation to observe the effect of solidification rate on crystal structures existing in both as cast and heat treated conditions. This study covers their microstructural examination and crystallography. The composition of these alloys was Al-(6.8-7.8)Fe-( 1.0-3)V-(1....
Effect of Electrodeposition Parameters on the Current Density of Hydrogen Evolution Reaction in Ni and Ni-MoS2 Composite Coatings Gueler, E. Saraloglu; KONCA, ERKAN; Karakaya, İshak (2013-04-01) Nickel composites with co-deposited insoluble, solid lubricant particles such as MoS2 have been reported to reduce friction. It is known that hydrogen evolution reaction (HER), competes with nickel deposition. The influence of the parameters and their interaction effects on the peak current density of HER during the electrodeposition of Ni and Ni-MoS2 composite coatings were studied by fractional factorial design. The parameters and their ranges studied were; MoS2 particle concentration (0-30 g/l), temperat...
Effect of metal surface coating on the moisture absorption characteristics of CFRP Şimşek, Selma; Orbey, Neşe; Department of Chemical Engineering (1987)
Effect of heat transfer on stability and transition characteristics of boundary-layers Özgen, Serkan (Elsevier BV, 2004-10-01) Stability and transition problems of two dimensional boundary-layers with heated walls have been studied numerically using the linear stability theory. Incompressible stability equations have been modified to account for the variation of temperature dependent fluid properties across the layer. The equations obtained have been solved with an efficient shoot-search technique. Low speed flows of air and water have been analyzed with a wide range of heat transfer rates. In addition to the mean velocity profile ...
Effect of synthesis parameters on structural properties and thermal behavior of Sol-Gel synthesized iron oxide Xerogels Dinçer Yılmaz, Nil Ezgi; Karakaş, Gürkan; Department of Chemical Engineering (2018) Currently used igniter system compositions are mostly based on the pyrotechnic blends of fuels and oxidizers. In this study, nanostructured metallic xerogels were synthesized by sol-gel method by using various types of proton scavengers and these metallic xerogels were used as oxidizers. In the experiments, Fe(NO3)3·9H2O was used as a precursor and a wide range of proton scavengers (propylene oxide, 1,2 epoxybutane, tetrahydrofuran, tetrahydropyran, 1,4 dioxane and ammonium hydroxide ) were used to start th...

Citation Formats

A. A. Günay and J. Shiomi, “Effect of Stress-Strain Profile on Bulk Thermal Conductivity,” presented at the American Physical Society, APS March Meeting 2021, Denver, CO, Amerika Birleşik Devletleri, 2021, Accessed: 00, 2021. [Online]. Available: https://hdl.handle.net/11511/92586.