Optimized Silica Aerogel Solar Thermal Absorbers

Date

2016-07-14

Author

Günay, Ahmet Alperen
Nagarajan, Naveen
Atten, Michael
Sotelo, Jesus
Miljkovic, Nenad

Metadata

Show full item record

This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

Item Usage Stats

39
views

0
downloads

URI

https://hdl.handle.net/11511/92688

Conference Name

ASME 2016 Summer Heat Transfer Conference, HT2016

Collections

Department of Mechanical Engineering, Conference / Seminar

Suggestions

OpenMETU
Core

Optimized Electromagnetic Harvester with a Non-Magnetic Inertial Mass Ulusan, Hasan; Yasar, Oguz; Zorlu, Ozge; Külah, Haluk (2015-09-09) This paper presents an optimization study to decrease the operation frequency and increase the output power of a miniature electromagnetic (EM) energy harvester, by incorporating a non-magnetic inertial mass together with the moving magnet. The harvester coil position has been optimized through FEM, and validated through tests. Experimental studies on the inertial mass showed that increasing the magnet size further increases the resonance frequency due to the increased magnetic forces. Conversely, using a n...
Optimized computer aided design of metallic springs. Eribol, H Müfit; Department of Mechanical Engineering (1983)
Optimized Multi-Constrained Quality-of-Service Multipath Routing Approach for Multimedia Sensor Networks Hasan, Mohammed Zaki; Al-Turjman, Fadi; Al-Rizzo, Hussain (2017-04-01) Modern multimedia sensor networks impose strict constraints on both the delay and energy consumption when time-critical data must be reported to the sink within a limited bandwidth without any loss. Failure to transmit an event to the sink occurs for many reasons, including inherence limitations of sensors, power consumption, and reliability. We propose a mathematical model for a novel quality-of-service (QoS) routingdetermination method. The proposed scheme enables determining the optimal path to provide a...
Optimisation of ceramic suspensions Brıscoe, Brian J.; Khan, Asad U.; Luckham, Paul F.; Özkan, Necati (1997-12-01)
Optimum characteristic properties of isolators with bilinear force-displacement hysteresis for seismic protection of bridges built on various site soils Dicleli, Murat (Elsevier BV, 2011-07-01) In this study, closed form equations as functions of the isolator, bridge and ground motion properties are formulated to calculate the optimum characteristic strength, Q(d) and post-elastic stiffness, k(d), of the isolator to minimize the maximum isolator displacement (MID) and force (MIF) for seismic isolated bridges (SIBS). For this purpose, first, sensitivity analyses are conducted to identify the bridge, isolator and ground motion parameters that affect the optimum values of Q(d) and k(d). Next, for the...

Citation Formats

A. A. Günay, N. Nagarajan, M. Atten, J. Sotelo, and N. Miljkovic, “Optimized Silica Aerogel Solar Thermal Absorbers,” presented at the ASME 2016 Summer Heat Transfer Conference, HT2016, Washington, Kiribati, 2016, Accessed: 00, 2021. [Online]. Available: https://hdl.handle.net/11511/92688.