Effect of compressive stresses on environment accelerated fatigue crack growth in mild steel.

1976
Akon, Tayfun
Show full item record
45
views
0
downloads
https://hdl.handle.net/11511/9278
Graduate School of Natural and Applied Sciences, Thesis

Suggestions

Effect of solidification rate on microstructure and primary carbides of AISI DC 53 cold work tool steel
Cardakh, Ismail Seckin; Kalkanlı, Ali (Springer Science and Business Media LLC, 2019-05-01)
The solidification behavior of AISI DC 53 cold work tool steel was investigated by means of a cooling curve and its first derivative. Copper and sand wedge-shaped molds were used to obtain various solidification rates. To reveal the cooling rate degree during solidification, the secondary dendrite arm spacing of the steel alloy was examined by scanning electron microscopy (SEM). The solidification rates of each section for both wedge steel samples were calculated by means of the secondary dendrite arm spaci...
EFFECT OF POROSITY ON INTERFACIAL FAILURE IN STEEL-FIBER-REINFORCED POLYMER-IMPREGNATED CONCRETE
Gündüz, Güngör (Elsevier BV, 1988-01-01)
The interfacial bond between a steel fibre and concrete generally increases with the polymer content. Naphthalene used to generate new pores in order t increase the polymer loading and thus to increase the interfacial bond strength has a positive effect up to 3% by weight. Higher amounts weaken the cementitious phase and also decrease the amount of polymer incorporated. Drying of concrete before impregnation at 150°C rather than at 105°C increases the polymer loading and thus the interfacial bond strength. ...
Effect of Fly Ash Fineness on the Activation of Geopolymer Concrete
Aleessa Alam, Burhan; Yaman, İsmail Özgür (2012-10-05)
In the field of construction materials and particularly in concrete, cement is considered as a key element since it generates a strong and durable material through a simple hydration process. However, for many reasons (mainly economic and environmental) researchers are trying to find a new material that could replace cement or at least part of it as a binding agent in concrete. Regarding this issue, cement replacement materials like fly ash and slag have taken the lead during the last few decades. These mat...
Effect of high hydrostatic pressure on microbial load and quality parameters of grape juice
Mert, Mecnun; Alpas, Hami; Department of Food Engineering (2010)
Effect of high hydrostatic pressure (150-200-250 MPa) on the microbial load and quality parameters (pH, color, 5-hydroxymethylfurfural-HMF) of white (Sultaniye) and red (Alicante Bouschet) grape juices with combination of temperature (20-30-40°C) and holding time (5-10-15 min) was studied. Increased pressure and temperature showed significant effect on microbial reduction in white and red grape juices (p<0.05). The effect of pressure and time on pH drop was found to be insignificant (p>0.05). HHP resulted i...
Effect of recycled cement concrete content on rutting behavior of asphalt concrete
Gul , Waqar Ahmed; Güler, Murat; Department of Civil Engineering (2008)
Disposed waste materials remained from demolished buildings have been an environmental problem especially for developing countries. Recycled Cement Concrete (RCC) is one of the abundant components of waste materials that include quality aggregates. Use of RCC in asphalt concrete pavements is economically a feasible option as it not only helps in recycling waste materials but also preserves natural resources by fulfilling the demand for quality aggregate in pavement constructions. However, due to variability...
Citation Formats
T. Akon, “Effect of compressive stresses on environment accelerated fatigue crack growth in mild steel.,” Middle East Technical University, 1976.
METU IIS - Integrated Information Service open@metu.edu.tr