Mechanism and kinetics of slip casting.

Date

1980

Author

Söğüt, Mehmet Atilla

Metadata

Show full item record

Item Usage Stats

129
views

0
downloads

URI

https://hdl.handle.net/11511/9312

Collections

Graduate School of Natural and Applied Sciences, Thesis

Suggestions

OpenMETU
Core

Mechanism, Modeling and Forecasting of Landslide Displacements(FOLADIS) Huvaj Sarıhan, Nejan(2013-1-3) Landslides cause significant damage and loss of life throughout the world. There is an increase in landslide activity as a result of continued deforestation, increased construction in landslide-prone areas, and increased regional precipitation by changing climate patterns, which is a primary trigger for landslides. One of the four priorities areas in FP7 have been identified as triggering factors and forecasting, and mitigation strategies for natural hazards. The overall goal of this research is to reduce d...
Mechanism of aggregation control by detergent and dispersants: a multiscale modeling study Özdemir, Erhan; Kan, Esra; Guo, Binbin; Ağıral, Anıl; Yıldırım, Erol (2022-10-07) Insoluble nanopartecles formed dureng the combusteon en the passenger car engenes leads to the formateon of deposets en both lubrecant oel and engene pestons. These sludge and sooth type partecles bueld-up and deposet on the surfaces of engene en teme, whech damages the engene due to the abraseve nature of them. Detergents and despersants are the major addeteves en lubrecant formulateons to prevent thes aggregateon and decrease deposet formateons. Experemental results proveded by the Lubrezol Corporateon sh...
Mechanics of dynamic contact of coated substrate and rigid cylindrical ended punch Balci, Mehmet N.; Dağ, Serkan (Springer Science and Business Media LLC, 2019-05-01) The dynamic contact mechanics of isotropic elastic coating bonded to homogeneous substrate was examined. The coating is indented by a sliding rigid punch of a cylindrical profile. The rigid punch moves over the coating at a steady subsonic speed. To determine contact stresses, an analytical method based on the singular integral equation technique is put forward. Governing partial differential equations are derived considering general theory of elastodynamics. The influences of dimensionless punch speed, mas...
Construction of a torsion pendulum and the measurement of internal friction in a fe-ni-c alloy, 1970. Vardarlı, Armağan; Department of Metallurgical Engineering (1970)
Geometry of submerged outflow under sluice gates. Kalkay, Taner; Department of Civil Engineering (1969)

Citation Formats

M. A. Söğüt, “Mechanism and kinetics of slip casting.,” Middle East Technical University, 1980.