Prediction of rotary drilling performance of a well using drilling parameters from a selected field

Download
005428.pdf
1989
Türkay, Ercüment
Show full item record
114
views
0
downloads
https://hdl.handle.net/11511/9397
Graduate School of Natural and Applied Sciences, Thesis

Suggestions

Prediction of bubble dynamics in a fluidized bed by the measurement of pressure oscillations
Parlak, M; Patoglu, V; Sayar, A; Vural, H (1998-07-29)
In the present study, the pressure fluctuations in a two-dimensional transparent fluidized bed are measured by a pressure transducer such that the bubble formation and movement can be detected from the signals. Bubble movement is recorded by a video camera and signals obtained from the pressure transducer are stored in a computer. Bubble diameters and rise velocities are determined from pressure-time data utilizing image and signal processing techniques.
PREDICTION OF SEISMIC ENERGY DISSIPATION IN SDOF SYSTEMS
Nurtuğ, Alphan; Sucuoğlu, Haluk (1995-11-01)
A simple analytical procedure is developed for calculating the seismic energy dissipated by a linear SDOF system under an earthquake ground excitation. The ground excitation is specified by its pseudo‐velocity spectra and effective duration whereas the SDOF system is defined by its natural period of vibration and viscous damping ratio. However, the derived relationship for the energy dissipation demand under an earthquake excitation is sensitive neither to the viscous damping ratio nor the ductility ratio w...
Prediction of workpiece dynamics and its effects on chatter stability in milling
Budak, Erhan; Alan, Salih; Özgüven, Hasan Nevzat (2012-01-01)
The workpiece dynamics affect stability in machining of flexible parts. However, it is not a straightforward task to include it in the analysis since the workpiece dynamics continuously change due to mass removal and variation of the cutter contact. In this paper, a methodology for prediction of inprocess workpiece dynamics is presented, which is based on a structural dynamic modification using the FE model of the workpiece. The cutter location (CL) file is used to determine the removed elements at each too...
Prediction of the cutting forces for robotic grinding processes with abrasive mounted bits
Açıkgöz, Kemal; Konukseven, Erhan İlhan; Department of Mechanical Engineering (2015)
In this study, cutting forces for robotic grinding processes with mounted bits are investigated. In the majority of the grinding literature, the grinding process is analyzed based on rigid grinding machines and larger size wheels. However, the robotic grinding systems involve small size tools. Therefore, currently there is a need to experimentally study the geometry and force relationships for mounted bits. In order to overcome some of the difficulties arising in grinding studies (e.g. need for dressing, co...
Prediction of torque and inductance displacement characteristics of asymmetrically slotted variable-reluctance motors using a simplified model for numerical field solution
Ertan, Hulusi Bülent (1999-09-01)
For prediction of static and dynamic performance of doubly-salient motors, it is essential to know their flux linkage-position-excitation characteristics and also the static torque characteristics. At the design stage determination of these characteristics presents difficulties because of highly nonlinear behavior of the magnetic circuit. It is possible to use numerical field solution of the complete motor to obtain this information. This, however, requires expertise on a professional program and may be exp...
Citation Formats
E. Türkay, “Prediction of rotary drilling performance of a well using drilling parameters from a selected field,” Middle East Technical University, 1989.
METU IIS - Integrated Information Service open@metu.edu.tr