Heat Capacity of A3(B,C) Ternary Ferromagnetic Alloys with FCC Structure

Date

1990-04-13

Author

Mehrabov, Amdulla

Metadata

Show full item record

This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

Item Usage Stats

59
views

0
downloads

URI

https://hdl.handle.net/11511/94169

Conference Name

XXV-th Yamada Conferences on “Magnetic Phase Transition”

Collections

Department of Metallurgical and Materials Engineering, Conference / Seminar

Suggestions

OpenMETU
Core

Heat effects in catalysts with bimodal pore size distribution Şahin, Ebru; Doğu, Timur; Mürtezaoğlu, Kırali; Department of Chemical Engineering (2000)
Heat treatment characteristics of a special high carbon - high chromium iron Öker, Ömer Faruk; Tekin, Erdoğan; Department of Metallurgical Engineering (1994)
Heat transfer in ultra-high temperature advanced ceramics under high enthalpy arc-jet conditions Cecere, Anselmo; Savino, Raffaele; Allouis, Christophe Gerard; Monteverde, Frederic (2015-12-01) Aim of this work is to analyze the response of an ultra-high temperature ceramic at typical heat flux conditions of thermal protection systems of a re-entry spacecraft. In particular, a ZrB2-SiC based ultra-high temperature advanced ceramic sharp leading edge demonstrator (1 mm nominal radius of curvature) was manufactured and tested in a non-equilibrium high enthalpy supersonic airflow, 20 MJ/kg of peak total enthalpy, by using an arc-jet ground facility. The surface temperature of the leading edge was mon...
Heat distribution in an inhomogenous model of head exposed to microwave radiation due to loop or dipole entenna excitations. Baykal, Yahya Kemal; Department of Electrical Engineering (1977)
Heat transfer enhancement by silver nanowire suspensions in microchannel heat sinks SIMSEK, Eylul; Coskun, Sahin; OKUTUCU-OZYURT, Tuba; Ünalan, Hüsnü Emrah (2018-01-01) Convection heat transfer and pressure drop characteristics of water based silver nanowire suspensions flowing through CMOS compatible monolithic microchannel heat sinks are investigated experimentally. Three different rectangular channels of 200 mu m x 50 mu m, 100 mu m x 50 mu m and 70 mu m x 50 mu m cross sectional area are used during the experiments. The stability of the silver nanofluids is established by the added polyvinylpyrrolidone (PVP) as the surfactant. To investigate the potential heat transfer...

Citation Formats

A. Mehrabov, “Heat Capacity of A3(B,C) Ternary Ferromagnetic Alloys with FCC Structure,” presented at the XXV-th Yamada Conferences on “Magnetic Phase Transition”, Osaka, Japonya, 1990, Accessed: 00, 2021. [Online]. Available: https://hdl.handle.net/11511/94169.