DRAG MINIMIZATION IN STOKES-FLOW

1989-01-01
Taşeli, Hasan
KAFALI, K
Show full item record
Creative Commons License
This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.
27
views
0
downloads
https://hdl.handle.net/11511/94467
INTERNATIONAL JOURNAL OF ENGINEERING SCIENCE
Department of Mathematics, Article

Suggestions

Drag Reduction via Phase Randomization in Turbulent Pipe Flow
Tugluk, Ozan; Tarman, Hakan I. (2015-09-18)
In this study, possibility of reducing drag in turbulent pipe flow via phase randomization is investigated. Phase randomization is a passive drag reduction mechanism, the main idea behind which is, reduction in drag can be obtained via distrupting the wave-like structures present in the flow. To facilitate the investigation flow in a circular cylindrical pipe is simulated numerically. DNS (direct numerical simulation) approach is used with a solenoidal spectral formulation, hence the continuity equation is ...
Dragline dynamic modelling for efficient excavation
Demirel, Nuray (Informa UK Limited, 2009-01-01)
Overburden excavation is an integral component of the surface mine production chain. In large mines, the walking dragline is a dominant strip mining machine. Production engineers and operators must be guided by appropriate strategies to preserve the structural and operating performance of this equipment to justify its high capital investment. The dragline performance mainly depends on the spatial kinematics and dynamics of its front-end assembly. In this study, the authors developed the dynamic modelling of...
Dragline Dynamic Modeling for Efficient Excavation
Demirel, Nuray (2007-06-08)
Overburden excavation is an integral component of the surface mine production chain. In large mines, the walking dragline is a dominant strip machine. Production engineers and operators must be guided by appropriate strategies to preserve the structural and operating performance of this equipment to justify its high capital investment. The dragline performance is a function of spatial kinematics and dynamics of its front-end assembly. In this study, the authors develop kinematics and dynamic modeling of a d...
Drag reduction and degradation behaviour of polyethylene oxide dilute water solutions in turbulent pipe flow.
Ghassan, Ali Diyab; Department of Mechanical Engineering (1975)
Drag measurement of different car bodies via balance technique and momentum integral method
Çaylan, Gülsüm; Albayrak, Kahraman; Department of Mechanical Engineering (2014)
In this thesis study, Ahmed Body and MIRA Notchback model were investigated experimentally. The drag coefficients of reference models were measured at three different Reynolds number via balance technique. The wakes of reference models were also investigated and the suitable location in order to measure the drag coefficient was determined via momentum integral method. Surface pressure of two different types of vehicle models was measured at three different Reynolds number. The wakes of Ahmed Body which has ...
Citation Formats
H. Taşeli and K. KAFALI, “DRAG MINIMIZATION IN STOKES-FLOW,” INTERNATIONAL JOURNAL OF ENGINEERING SCIENCE, vol. 27, no. 6, pp. 633–640, 1989, Accessed: 00, 2021. [Online]. Available: https://hdl.handle.net/11511/94467.
METU IIS - Integrated Information Service open@metu.edu.tr