A new metric for net-zero carbon buildings

Date

2007-01-01

Author

Kılkış, Şiir

Metadata

Show full item record

This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

Item Usage Stats

55
views

0
downloads

In this study a new carbon equivalency metric was developed in order to quantify the compound carbon emissions that buildings are responsible in the built environment. This metric first analyses the rationale about the management of exergy balance among supply and demand involved in satisfying building power and energy loads. Then using the degree of the rationale found, direct carbon emissions from the building and avoidable secondary carbon emissions that the building is responsible due to exergy mismatches are calculated. Based on this metric a net-zero carbon building definition was introduced and its advantages for quantifying the actual impact of buildings on global sustainability were discussed in comparison to net-zero energy building and carbon neutral building concepts. A case study for an example net-zero energy building is presented, which reveals that the new carbon equivalency metric can indicate whether the building is actually environmentally neutral or not. Results show that the example building has negative impact on environment and global sustainability in terms of carbon emissions even though it is rated a net-zero building. This paper also discusses that although another new net-zero exergy building definition may reduce the shortcomings of the net-zero building definition, only the net-zero carbon building metric may accurately rate the environmental impact of buildings. Beyond carbon emissions from buildings, the same metric can be used for any variety of greenhouse emissions and sectors.

URI

https://hdl.handle.net/11511/94759

DOI

https://doi.org/10.1115/es2007-36263

Conference Name

ASME Energy Sustainability Conference

Collections

Graduate School of Natural and Applied Sciences, Conference / Seminar

Suggestions

OpenMETU
Core

A methodology for evaluating environmental co-benefits in the transport sector: application to the Delhi metro Doll, Christopher N. H.; Balaban, Osman (Elsevier BV, 2013-11-01) This paper presents a methodology to measure the environmental co-benefits of transport initiatives, defined here as carbon emissions in conjunction with local air pollution. An evaluation tool was developed and then tested on the case of the Delhi metro. The metro is an extensive rail project spanning the Indian capital, which is also the world's first rail based Clean Development Mechanism (CDM) project. However, it has also been a flashpoint in urban policy-making in the city in recent years. This analys...
Investigation of non-methane volatile organic carbon emissions from interior materials used in the intercity buses Görmez, Baran; Atımtay, Aysel; Department of Environmental Engineering (2004) The objectives of this study are to determine the non-methane volatile organic carbon emissions from the parts used in the interiors of buses at different temperatures and to analyze the components of these emissions. The total non-methane volatile organic carbon (NMVOC) concentrations in various sections of a bus were measured in order to determine the indoor air pollution in the bus. Different samples of the materials used in the interior parts of the buses were provided by the manufacturing company and t...
A simplified approach for slope stability analysis of uncontrolled waste dumps TÜRER, DİLEK; Türer, Ahmet (SAGE Publications, 2011-02-01) Slope stability analysis of municipal solid waste has always been problematic because of the heterogeneous nature of the waste materials. The requirement for large testing equipment in order to obtain representative samples has identified the need for simplified approaches to obtain the unit weight and shear strength parameters of the waste. In the present study, two of the most recently published approaches for determining the unit weight and shear strength parameters of the waste have been incorporated in...
A Novel design and fabrication paradigm for 3D printers: LIPRO Haseltalab, Vahid; Yaman, Ulaş; Dölen, Melik; Department of Mechanical Engineering (2018) This study starts with highlighting some disadvantages of the conventional design and fabrication pipelines of Additive Manufacturing (AM) processes. In order to overcome the major drawbacks of the conventional pipeline, a novel design and fabrication pipeline called as LIPRO is proposed and it is implemented on two different AM processes to illuminate its effectiveness on alleviating the disadvantages of the conventional approaches. A single board computer is used to realize the method on AM machines. The ...
Future Mangrove Carbon Storage Under Climate Change and Deforestation Chatting, Mark; Al-Maslamani, Ibrahim; Walton, Mark; Skov, Martin W.; Kennedy, Hilary; Hüsrevoğlu, Yusuf Sinan; Le Vay, Lewis (2022-02-01) Mangroves are important sinks of organic carbon (C) and there is significant interest in their use for greenhouse gas emissions mitigation. Adverse impacts on organic carbon storage potential from future climate change and deforestation would devalue such ambitions, thus global projections of future change remains a priority research area. We modeled the effects of climate change on future C stocks and soil sequestration rates (CSR) under two climate scenarios ("business as usual": SSP245 and high-emissions...

Citation Formats

Ş. Kılkış, “A new metric for net-zero carbon buildings,” presented at the ASME Energy Sustainability Conference, California, Amerika Birleşik Devletleri, 2007, Accessed: 00, 2021. [Online]. Available: https://hdl.handle.net/11511/94759.