Cooling load calculation of machine room in computer center and selection of air conditioning unit.

Download
023602.pdf
1992
Kahraman, Fatih
Show full item record
86
views
0
downloads
https://hdl.handle.net/11511/9543
Graduate School of Natural and Applied Sciences, Thesis

Suggestions

Cooling curve thermal analyses and oxygen activity analyses for the estimation of microstructural properties of nodular cast iron
Çehiz, Cansın; Kalkanlı, Ali; Department of Metallurgical and Materials Engineering (2019)
Although nodular cast iron grades have mechanical properties competitive with plain carbon steel grades, they have advantage in terms of price due to relatively low raw material and energy costs. Therefore, they are widely used in various industries, especially in automotive, machinery, piping and wind power industries. High number of process variables affecting the solidification behavior of nodular cast iron melt makes it difficult to ensure the resulting microstructure, thus the performance of nodular ca...
Cooling performance investigation of a two-pass rib-roughened channel
Kavas, İsa; Kurtuluş, Dilek Funda; Yasa, Tolga; Department of Aerospace Engineering (2015)
The performance of the modern aero-engines is highly dependent on the turbine inlet gas temperature. The higher temperature leads to more compact and efficient machines. Additionally, specific fuel consumption of the engine is decreased for the same thrust rating. However, the turbine inlet temperatures of the today’s engines are already beyond the material structural limits. Hence, the turbine section must be cooled down to acceptable levels. Various types of cooling methods are typically applied to the ga...
Thermal management of electronics cabinet and effects of different front cover patterns
Çobanoğlu, Yankı; Tarı, İlker; Department of Mechanical Engineering (2019)
An electronics cabinet populated with different components such as workstations, uninterrupted power supply, etc. is experimentally and numerically investigated. Experimental temperature measurements were taken on different locations surrounding the components using type-K thermocouples and a data logger over a period of 8 hours in which the cabinet was in steady-state. These measurements were then used to validate the numerical model created in commercially available computational fluid dynamics software A...
COOLING BEHAVIOR AND MECHANICAL PROPERTIES OF SOLID SOLUTION STRENGTHENED FERRITIC MATERIALS
Shariati, Behdad; Kalkanlı, Ali; Department of Metallurgical and Materials Engineering (2022-2)
In this thesis, the mechanical properties of old generation ductile iron and new generation SSF materials were compared and investigated by observing cooling behavior. For exploring the thermal analysis, cooling curves were recorded by a temperature scanner to reveal the effect of graphite shape modification by optimum inoculation. Correlations were performed with microstructural features obtained by image analysis and cooling curve analysis. It was observed that inoculation increases the TL and prevents ca...
Thermal performance optimization of building aspect ratio and south window size in five cities having different climatic characteristics of Turkey
Inanici, MN; Demirbilek, FN (2000-01-01)
The aim of the study is to establish optimum building aspect ratios and south window sizes of residential buildings from thermal performance point of view. The effects of 6 different building aspect ratios and eight different south window sizes for each building aspect ratio are analyzed for apartments located at intermediate floors of buildings, by the aid of the computer based thermal analysis program SUNCODE-PC in five cities of Turkey: Erzurum, Ankara, Diyarbakir, Izmir, and Antalya. The results are eva...
Citation Formats
F. Kahraman, “Cooling load calculation of machine room in computer center and selection of air conditioning unit.,” Middle East Technical University, 1992.
METU IIS - Integrated Information Service open@metu.edu.tr