Basınçlı akımlarda taban şekillerinin ve ilişkin yük kayıplarının incelenmesi

Date

1970-01-01

Author

Tekeli, Yaşar
Acaroğlu, Ertan R.

Metadata

Show full item record

This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

Item Usage Stats

32
views

0
downloads

URI

https://hdl.handle.net/11511/95537

Collections

Department of Civil Engineering, Project and Design

Suggestions

OpenMETU
Core

Investigation of the effect of geometrical parameters of pressure swirl atomizer on the hollow cone spray Tokgöz, Tolga; Ulaş, Abdullah; Department of Mechanical Engineering (2019) In this study, effects of geometrical parameters of pressure swirl atomizer on the hollow cone spray are investigated experimentally, and physical phenomenon inside the pressure swirl atomizer is investigated numerically. In the experimental studies, hollow cone spray properties are examined macroscopically and microscopically. Macroscopic spray properties are studied by a visual technique called high-speed shadowgraphy. The hollow cone spray images are captured for different geometrical configurations of t...
Development of a computer code to analyse fluid transients in pressurized pipe systems Dalgıç, Hasan; Bozkuş, Zafer; Department of Civil Engineering (2017) Sudden change of flow conditions in a pipeline may cause the flow to become time dependent and would start an undesirable physical phenomenon called water hammer. These sudden changes can be caused by variety of scenarios and some of them include valve operations (opening or closing), sudden power loss at pump stations and load rejections or load acceptance at the turbines, etc. Because of its very costly to solve, and sometimes deadly results, it is quite important that transient scenarios be considered fo...
Experimental and numerical investigation of pressure swirl atomizers Sümer, Bülent; Tuncer, İsmail Hakkı; Uzol, Oğuz; Department of Aerospace Engineering (2014) In this study, unsteady flows inside a pressure swirl atomizer are investigated using experimental and numerical techniques. High Speed Shadowgraphy Technique is used in order to visualize the flow structures inside the atomizer and the resulting spray at high temporal and spatial resolutions. The images of the air core inside the pressure swirl atomizer and the resulting spray formations are captured at four di erent water flow rates. Then, the time variation of the air core diameter at di erent axial loca...
Development of a methodology for sizing and assessment of wind integrated advanced adiabatic compressed air energy storage system (aa-caes) Taştankaya, Koray; Tarı, İlker; Baker, Derek Keıth; Department of Mechanical Engineering (2014) Renewable energy usage has become widespread and gained world-wide importance lately. In order to get high quality power from renewable energy sources to the grid, bulk energy storage system will be required as a buffer, due to the intermittent nature of renewable energy. Advanced adiabatic compressed air energy storage (AA-CAES) technology is uniquely different from conventional energy storage techniques for renewable energy in that it captures and stores the heat generated during the compression cycle and...
A new computer code development for solving fluid transient problems in pressurized pipelines Uyanık, Murat Cenk; Bozkuş, Zafer; Department of Civil Engineering (2023-1-26) The water hammer phenomenon, which occurs as a result of changes in the boundary conditions of hydraulic systems, can cause major and dangerous problems. Opening or closing of the valve component, sudden power loss or pump startup, change of water level in the reservoir, etc. can be examples of these boundary condition changes. These problems must be considered at the design stage of hydraulic pipeline systems in order to predict and prevent dangerous results. Since the calculation of water hammer analysis ...

Citation Formats

Y. Tekeli and E. R. Acaroğlu, “Basınçlı akımlarda taban şekillerinin ve ilişkin yük kayıplarının incelenmesi,” 1970. Accessed: 00, 2022. [Online]. Available: https://hdl.handle.net/11511/95537.