Titreşen dikdörtgen plaklardan yayılan sesin incelenmesi

Date

1983-12-15

Author

Ünal, Cihangir
Ünlüsoy, Yavuz Samim

Metadata

Show full item record

This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

Item Usage Stats

27
views

0
downloads

URI

https://hdl.handle.net/11511/95566

Collections

Department of Mechanical Engineering, Project and Design

Suggestions

OpenMETU
Core

Titreşim tabanlı bir mekanik kızılötesi duyarga ve bunu kullanan bir kızılötesi görüntüleme yöntemi Azgın, Kıvanç (Türk Patent Enstitüsü, 2013) Buluş, bir ya da birden fazla tınlaşan piksel yapısına, ve tınlaşan piksellerin mekanik rezonansı aracılığıyla gelen kızılötesi ışınımın ölçülmesi için bir kızılötesi görüntüleme yöntemine sahip, titreşim tabanlı bir mekanik KÖ duyarga ile ilgilidir
Design and implementation of low power interface electronics for vibration-based electromagnetic energy harvesters Rahimi, Arian; Külah, Haluk; Muhtaroğlu, Ali; Department of Electrical and Electronics Engineering (2011) For many years batteries have been used as the main power sources for portable electronic devices. However, the rate of scaling in integrated circuits and micro-electro-mechanical systems (MEMS) has been much higher than that of the batteries technology. Therefore, a need to replace these temporary energy reservoirs with small sized continuously charged energy supply units has emerged. These units, named as energy harvesters, use several types of ambient energy sources such as heat, light, and vibration to ...
Damage detection in structures using vibration measurements Aydoğan, Mustafa Özgür; Özgüven, Hasan Nevzat; Department of Mechanical Engineering (2003) Cracks often exist in structural members that are exposed to repeated loading, which will certainly lower the structural integrity. A crack on a structural member introduces a local flexibility which is a function of the crack depth and location. This may cause nonlinear dynamic response of the structure. In this thesis, a new method is suggested to detect and locate a crack in a structural component. The method is based on the fact that nonlinear response of a structure with a crack will be a function of t...
Design of a test setup for the characterization of vibration isolators Uz, Canan; Özgen, Gökhan Osman; Ciğeroğlu, Ender; Department of Mechanical Engineering (2013) Design of a test setup to investigate dynamic characteristics of a vibration isolator has been extensively studied over the years and international standards are regulated to explain the basis of the measurements. In this thesis, design efforts to develop a custom test setup for measuring dynamic stiffness of vibration isolators are presented. The setup is designed to conduct dynamic stiffness measurements for various static preload values and over a certain (target) frequency range. Direct Method has been ...
Titreşim Temelli Uydu Yönelim Denetimi Eyleyicisi Kavramsal Doğrulaması Tekinalp, Ozan; Azgın, Kıvanç(2019-01-01) Bu projede özgün salınımlı rotor ve yalpalayan çubuk tipi prototip yönelim kontrol eyleyicileri gelistirilmistir. Öncelikle eyleyicilerin uydu yönelimine etkileri matematiksel olarak modellenmistir. Daha sonra olusturulan matematik modelden çıkarımlar yapılarak tasarım yaklasımları belirlenmis ve eyleyici tasarımları yapılmıstır. Yük hücresi ve dijital-analog dönüstürücü kartlarından olusan deneysel bir düzenekten faydalanarak eyleyicilerin çalısması kaynaklı kuvvet ve moment degerleri ölçülmüstür. Ayrıca t...

Citation Formats

C. Ünal and Y. S. Ünlüsoy, “Titreşen dikdörtgen plaklardan yayılan sesin incelenmesi,” 1983. Accessed: 00, 2022. [Online]. Available: https://hdl.handle.net/11511/95566.