Optimization of cutting conditions for multi-pass turning and single-pass milling operations

Zümrüt, Yavuz


Optimization of Isolation Bearing Parameters for Effective Mitigation of Seismic Risk for Bridges
Dicleli, Murat (null; 2009-06-14)
Optimization of ETV-ICP(TOF)MS and transient signal profiles for reducing isobaric interferences
Ertaş, Gülay (Royal Society of Chemistry (RSC), 2005-01-01)
One of the advantages of the ETV sample introduction is the ability to temporally separate analyte elements in complex mixtures by differences in their vaporization temperatures within the ETV for ICPMS. However, the broadening of the transient peaks in the transport tubing often obscures this temporal resolution. This study shows that decreasing the transport tubing diameter produces little broadening beyond that produced during aerosol production in the ETV. Maintaining such narrow peaks through the trans...
Optimization of laser processing for PERC type c-Si solar cells
Genç, Ezgi; Turan, Raşit; Department of Micro and Nanotechnology (2019)
Passivated Emitter Rear Contact (PERC) type solar cells, which currently owns a similar market share as the standard type solar cells, is expected to be the dominant type of the photovoltaic (PV) market in near future (ITRPV, 2019) due to its high performance/cost ratio. Hence, it is critical to optimize PERC process steps to achieve higher efficiencies. In PERC concept, the stack of a passivation layer and SiNx capping layer is locally ablated to form low recombination and low resistive contacts. In this w...
Aksay, Anil; Bugdayci, Done; Akar, Gözde (2011-05-18)
In this study, we propose a heuristic methodology for modeling the end-to-end distortion characteristics of an error resilient broadcast system for 3D video overDigital Video Broadcasting -Handheld (DVB-H). We also use this model to optimally select the parameters of the video encoder and the error correction scheme, namely, Multi Protocol Encapsulation Forward Error Correction (MPE-FEC), minimizing the overall distortion. The proposed method models the RQ curve of video encoder and performance of channel c...
Optimization of Pyrolysis and Liquid Silicon Infiltration Parameters for the Processing of C C SiC Composites
Tulbez, Simge; Esen, Ziya; Dericioğlu, Arcan Fehmi (2016-11-25)
The aim of the current study is to investigate the production and characterization of Carbon Fiber Reinforced Silicon Carbide (C/C-SiC) Matrix Composites. Liquid silicon infiltration (LSI) method was utilized to produce the C/C-SiC composites. Processing of these composites via LSI process contains there main steps: Carbon Fiber Reinforced Polymer (CFRP) composite production, pyrolysis and liquid silicon infiltration. Each production step has an important effect on the efficiency of the LSI process, therefo...
Citation Formats
Y. Zümrüt, “Optimization of cutting conditions for multi-pass turning and single-pass milling operations,” Middle East Technical University, 1992.