Yatay kuyularla yerinde yanma yönteminin laboratuvar incelemesi

Date

1992-02-01

Author

Aybak, Tuğrul
Bağcı, A. Suat
Shamsul, Aziz

Metadata

Show full item record

This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

Item Usage Stats

18
views

0
downloads

URI

https://hdl.handle.net/11511/95701

Collections

Department of Petroleum and Natural Gas Engineering, Project and Design

Suggestions

OpenMETU
Core

Analysis of sinusoidal and helical buckling of drill string in horizontal wells using finite element method Arpacı, Erdoğan; Özbayoğlu, Evren; Department of Petroleum and Natural Gas Engineering (2009) The number of horizontal wells is increasing rapidly in all over the world with the growth of new technological developments. During horizontal well drilling, much more complex problems occur when compared with vertical well drilling, such as decrease in load transfer to the bit, tubular failure, tubular fatigue and tubular lock-up. This makes selection of appropriate tubular and making the right drill string design more important. As the total compression load on the horizontal section increases, the behav...
Determination of critical submergence depth at horizontal intakes Haspolat, Emre; Göğüş, Mustafa; Köken, Mete; Department of Civil Engineering (2015) The purpose of the study is to investigate the formation of air entraining vortices under both symmetrical and asymmetrical approach flow conditions in an experimental setup of a horizontal water intake structure composed of a reservoir-pipe system. To determine at which critical submergence the air entraining vortices forming; a series of experiments were conducted in the experimental setup with horizontal pipes of four different diameters. Approach channel side walls of the intake structure model are adju...
Formation of air-entraining vortices at horizontal water intakes / Zaloğlu, Cihan; Göğüş, Mustafa; Department of Civil Engineering (2014) The goal of this study is to estimate the critical submergence depths of horizontal water intakes that have symmetrical and asymmetrical approach flow conditions by using empirical equations. Therefore a series of experiments were performed in a reservoir-pipe system dominated by gravity and controlled by a valve. On account of adjustable lateral walls, symmetrical and asymmetrical flow conditions were created at various Froude numbers. For a wide range of discharges and for three different pipe diameters, ...
Yatay eksenli rüzgâr türbinleri için gürbüz tasarım yöntemi Altuğ Yalçın, Ayşe Hazal; Yavrucuk, İlkay; Uzol, Oğuz (null; 2019-10-03) Gürbüz tasarım, kontrol edemediğimiz değişkenlerden çok etkilenmeyen tasarımdır ve rüzgarın stokastik yapısı dolayısıyla rüzgar türbinleri için önemlidir. Bu makalede enerji maliyetini düşürebilmek için yatay eksenli rüzgar türbinlerinin tasarımında kullanılmak üzere Gürbüz Tasarım Simülasyonu yöntemi anlatılmıştır. Bu yöntemde öncelikle uygun tasarım değişkenleri ve geçerli oldukları aralıklar seçilir. Sonrasında deney tasarımları yöntemi uygulanarak tasarım uzayının incelenmesini kolaylaştırır. Enerji mal...
Nonlinear modeling and vibration analysis of horizontal drum type washing machines Baykal, Cem; Yazıcıoğlu, Yiğit; Department of Mechanical Engineering (2019) Nonlinear two and three-dimensional dynamical models for horizontal drum type washing machines are developed considering rotating unbalance type excitation. Nonlinear differential equations of motion are converted into a set of nonlinear algebraic equations by using the Harmonic Balance Method (HBM). The resulting nonlinear algebraic equations are solved by using Newton’s method with arc-length continuation. Several case studies are performed in order to observe the effects of orientation angles of springs ...

Citation Formats

T. Aybak, A. S. Bağcı, and A. Shamsul, “Yatay kuyularla yerinde yanma yönteminin laboratuvar incelemesi,” 1992. Accessed: 00, 2022. [Online]. Available: https://hdl.handle.net/11511/95701.