Sürekli metalik fiber takviyeli seramik matrisli saydam zırh kompozitlerin üretimi ve karakterizasyonu

2008-08-01

Suggestions

FPGA implementation of field oriented control forpermanent magnet synchronous motor
Irmak, Gizem; Saranlı, Afşar; Department of Electrical and Electronics Engineering (2019)
The thesis study focuses on the fully operational FPGA implementation for the current/torque control of a Permanent Magnet Synchronous Motor. 3-phase synchronous motors with permanent magnets can be categorized into two categories as Permanent Magnet Synchronous Motor (PMSM) and Brushless Direct Current (BLDC) motor. The main difference between PMSM and BLDC is the shape of the induced back-EMF voltage. While BLDC motors have trapezoidal shaped back-EMF, PMSMs have a sinusoidal back-EMF. In order to take ad...
Sürekli Döküm Makinelerindeki Sıvı Çelik Akışının Sayısal Hesaplamalı Akışkanlar Dinamiği Yöntemiyle Modellenmesi
Yavuz, Mehmet Metin(2014-12-31)
Çelik üretiminin en önemli adımlarından biri olan sürekli döküm, çok sayıda akışkanlar dinamiği ve ısı transferi problemleri içerir. Sürekli döküm makineleri içindeki sıvı çelik akışı çeliğin dökülebilmesini ve üretilen çeliğin kalitesini doğrudan etkilemektedir. Genelde, üç farklı maddenin üç farklı fazda bulunması (sıvı çelik, argon gaz, ve katı katık) ve bu fazların da basınç ve sıcaklığa bağlı olması akışı kompleks bir yapıya dönüştürmektedir. Sürekli döküm makinelerinin içindeki akışın gerek sabit ger...
Sürekli akış sisteminde sentez edilen MFI tipi zeolit membranların tek gaz geçirgenlik ölçümleri ve çift gaz karışımlarının ayrımı ile karakterizasyonu
Soydaş Sözer, Belma; Çulfaz Emecen, Pınar Zeynep; Çulfaz, Ali; Kalıpçılar, Halil (null; 2006-09-08)
Pervaporation of organic/water mixtures by MFI type zeolite membranes synthesized in a flow system
Dede, Özlem; Kalıpçılar, Halil; Department of Chemical Engineering (2007)
Zeolite membrane synthesis is conventionally carried out in batch systems. Recently, several attempts have been performed to synthesize zeolite membranes in flow systems which can allow preparation of membranes with large specific surface areas. Membranes synthesized in the recirculating flow system had comparable N2/SF6 and n- C4H10/i-C4H10 ideal selectivities with the membranes prepared in the batch system, indicating that good quality membranes can be produced by this method. The objective of this study ...
Biological hydrogen production on acetate in continuous panel photobioreactors using rhodobacter capsulatus
Androga, Dominic Deo; Eroğlu, İnci; Department of Chemical Engineering (2009)
Photobiological hydrogen production from organic acids occurs in the presence of light and under anaerobic conditions. Stable and optimized operation of the photobioreactors is the most challenging task in the photofermentation process. The main aim of this study was to achieve in long term, a stable and high hydrogen production on acetate, using the photosynthetic bacteria Rhodobacter capsulatus in continuous panel photobioreactors. Rhodobacter capsulatus (DSM 1710), heat adapted Rhodobacter capsulatus (DS...
Citation Formats
A. F. Dericioğlu, B. Ögel, and N. S. Gürbüz, “Sürekli metalik fiber takviyeli seramik matrisli saydam zırh kompozitlerin üretimi ve karakterizasyonu,” 2008. Accessed: 00, 2022. [Online]. Available: https://hdl.handle.net/11511/95763.