Çerçeve sistemlerin elastik olmayan lokal deformasyon talepleri için yaklaşık bir yöntem

Date

2006-07-01

Author

Akkar, Sinan
Yakut, Ahmet
Metin, Aslı

Metadata

Show full item record

This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

Item Usage Stats

29
views

0
downloads

Subject Keywords

URI

https://hdl.handle.net/11511/95776

Collections

Department of Civil Engineering, Project and Design

Suggestions

OpenMETU
Core

Evaluation of pushover analysis procedures for frame structure Oğuz, Sermin; Yakut, Ahmet; Department of Civil Engineering (2005) Pushover analysis involves certain approximations and simplifications that some amount of variation is always expected to exist in seismic demand prediction of pushover analysis. In literature, some improved pushover procedures have been proposed to overcome the certain limitations of traditional pushover procedures. The effects and the accuracy of invariant lateral load patterns utilised in pushover analysis to predict the behavior imposed on the structure due to randomly selected individual ground motions...
Inelastic deformation demands on moment-resisting frame structures Metin, Aslı; Akkar, Sinan D.; Department of Civil Engineering (2006) Interstory drift ratio is an important parameter for the determination of the structural performance under strong ground motions. A probabilistic procedure is proposed in this study to estimate the inelastic maximum interstory drift ratio. The procedure considers the uncertainties associated with the strong ground motions and structural behavior. Elastic and inelastic response history analyses of reinforced-concrete, moment-resisting frames are used together with a near-fault strong ground motion data set t...
Explicit nonlinear analysis for quasi-static behavior of frame structures with pid control and mass scaling Kocamaz, Korhan; Tuncay, Kağan; Department of Civil Engineering (2018) Performance-based seismic design of reinforced concrete frame systems requires time history analysis of the structural model under earthquake loads and estimation of damage in the members. Time history analysis of these structures is usually performed using implicit time integration methods. For the implicit integration methods, divergence of the solution is typically treated as the onset of collapse of modelled system. In this study, a nonlinear analysis platform that enables the analysis of the effect of ...
Effects of frame aspect ratio on the seismic performance improvement of pc panel strengthening technique Okuyucu, Dilek; Ergun, Mehmet Ufuk; Department of Civil Engineering (2011) PC panel strengthening technique was developed in M.E.T.U. Structural Mechanics Laboratory in order to respond the need of practical and efficient pre-quake seismic strengthening procedures applicable to RC framed structures. The idea behind the method is simply to convert the non-structural infills into load bearing structural elements by gluing PC panels over the existing infill wall surface. The remarkable advantages of the procedure is not only the considerable amount of seismic performance improvement ...
Çerçevelerin yapısal çelik elemanlarla güçlendirilmesi için tasarım metotları geliştirilmesi Binici, Barış(2010) Bu çalışmada mevcut kusurlu betonarme yapıların çelik yapı elemanları kullanılarak güçlendirilmesi, deneysel ve sayısal olarak incelenmiştir. Çelik yapı elemanları ile güçlendirme İç Güçlendrime ve Dış Güçlendirme Sistemleri olmak üzere iki ana kısımda ele alınmıştır. İç güçlendirme sistemlerinde İç Ters V çelik çapraz (İTVÇÇ), X-çelik çapraz (X-ÇÇ), kesme plakalı kolon (KPK) ve iç çelik çerçeve (İÇÇ) metodları denenmiştir. Dış güçlendirme sistemlerinde ise dış çelik çerçeve (DşÇÇ), dış çelik plaka (DşÇP) v...

Citation Formats

S. Akkar, A. Yakut, and A. Metin, “Çerçeve sistemlerin elastik olmayan lokal deformasyon talepleri için yaklaşık bir yöntem,” 2006. Accessed: 00, 2022. [Online]. Available: https://hdl.handle.net/11511/95776.