Stabilize arıtma çamurlarında patojenlerin yeniden üreme potansiyellerinin araştırılması

Date

2011-12-01

Author

Özdağ, Hilal
Erkan, Müge
Sanin, Faika Dilek

Metadata

Show full item record

This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

Item Usage Stats

39
views

0
downloads

URI

https://hdl.handle.net/11511/95793

Collections

Department of Environmental Engineering, Project and Design

Suggestions

OpenMETU
Core

Friction identification and compensation of its effects in stabilized platforms Sincar, Eyyüp; Balkan, Raif Tuna; Platin, Bülent Emre; Department of Mechanical Engineering (2013) A frequent problem encountered in the stabilization of a dynamic system supported by a moving base is the disturbance rejection associated with moving components. Due to relative motion of adjacent components, the friction induces a destabilizing force from base motion to the stabilized object, which degrades the motion accuracy. Therefore, the compensation of frictional effects is necessary in order to obtain a highly precise stabilization performance, especially, when the stabilized system undergoes low-v...
Platform motion disturbances decoupling by means of inertial sensors for a motion stabilized gimbal Mutlu, Deniz; Balkan, Raif Tuna; Platin, Bülent Emre; Department of Mechanical Engineering (2015) In this study, a method is developed to overcome platform motion based disturbances resulting from kinematic and dynamic interactions between platform and gimbal system. The method is confined to using underlying non-linear relations in order to increase performance of the system in nearly all of its motion envelope. Sensor requirements and measurements methods are also stated for the developed method. In order to simulate real system conditions, an identification procedure is applied on the system whose ou...
Development of a DSP-FPGA-based resolver-to-digital converter for stabilized gun platforms Zengin, Yasin; Erkmen, İsmet; Department of Electrical and Electronics Engineering (2010) Resolver, due to its reliability and durability, has been used for the aim of shaft position sensing of military rotary systems such as tank turrets and gun stabilization platforms for decades. Ready-to-use resolver-to-digital converter integrated circuits which convert the resolver signals into position and speed measurements are utilized in servo systems most commonly. However, the ready-to-use integrated circuits increase the dependency of the servo system to hardware components which in turn decrease th...
The finite element method over a simple stabilizing grid applied to fluid flow problems Aydın, Selçuk Han; Tezer-Sezgin, Münevver; Department of Scientific Computing (2008) We consider the stabilized finite element method for solving the incompressible Navier-Stokes equations and the magnetohydrodynamic (MHD) equations in two dimensions. The well-known instabilities arising from the application of standard Galerkin finite element method are eliminated by using the stabilizing subgrid method (SSM), the streamline upwind Petrov-Galerkin (SUPG) method, and the two-level finite element method (TLFEM). The domain is discretized into a set of regular triangular elements. In SSM, the...
Ethyl lactate production by hybrid processes: determination of phase diagrams and evaluation of performance of organophilic pervaporation membranes İnal, Mine; Yılmaz, Levent; Karakaş, Gürkan; Department of Chemical Engineering (2003)

Citation Formats

H. Özdağ, M. Erkan, and F. D. Sanin, “Stabilize arıtma çamurlarında patojenlerin yeniden üreme potansiyellerinin araştırılması,” 2011. Accessed: 00, 2022. [Online]. Available: https://hdl.handle.net/11511/95793.