Roketlerin aerodinamik ve aerı-termodinamik tasarım optimizasyonu

Date

2013-03-01

Author

Yumuşak, Mine
Eyi, Sinan

Metadata

Show full item record

This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

Item Usage Stats

104
views

0
downloads

URI

https://hdl.handle.net/11511/95807

Collections

Department of Aerospace Engineering, Project and Design

Suggestions

OpenMETU
Core

Numerical prediction of aerodynamic stability derivatives of a projectile Yayla, Koray; Özyörük, Yusuf; Department of Aerospace Engineering (2021-9-07) Prediction of aircraft aerodynamic stability derivatives is crucial for evaluating its flight dynamic characteristics. By using the open source SU2 software, steady and unsteady Reynolds-Averaged Navier-Stokes analyzes are performed in order to determine the aerodynamic stability derivatives of a missile like projectile from literature. The employed prediction methods that are based on forced oscillatory motion and differential method are particularly emphasized for roll damping and pitch damping derivative...
Multiobjective design optimization of rockets and missiles Öztürk, Mustafa Yavuz; Tekinalp, Ozan; Department of Aerospace Engineering (2009) Multidisciplinary design optimization of aerospace vehicles has attracted interest of many researchers. Well known aerospace companies are developing tools for the mutlidisciplinary design optimization. However, the multiobjective optimization of the design is a new and important area investigated very little by the researchers. This thesis will examine the approaches to the multiobjective and mutlidisciplinary design optimization of rockets and missiles. In the study, multiobjective optimization method cal...
Development and implementation of high temperature resistant resin systems that can be used with fiber/fabric reinforcement for use in missile/rocket applications Kaya Deniz, Tuğba; Bayramlı, Erdal; Doğan, Özdemir; Department of Polymer Science and Technology (2017) Motor case of a rocket/missile system is exposed to hot and high pressure gases. Its structural components such as control surfaces, outer casing are exposed to mechanical loads and aerodynamic heating due to the high velocity of the system. Therefore reinforced resin matrix polymeric composite materials are needed. These materials are applied inside and outside of the rocket/missile system in order to resist the aforementioned conditions. Considering the increasing difficulties in design criteria, rocket/m...
Three dimensional laminar compressible navier stokes solver for internal rocket flow applications Coşkun, Korhan; Aksel, Mehmet Haluk; Department of Mechanical Engineering (2007) A three dimensional, Navier-Stokes finite volume flow solver which uses Roe’s upwind flux differencing scheme for spatial and Runge-Kutta explicit multi-stage time stepping scheme and implicit Lower-Upper Symmetric Gauss Seidel (LU-SGS) iteration scheme for temporal discretization on unstructured and hybrid meshes is developed for steady rocket internal viscous flow applications. The spatial accuracy of the solver can be selected as first or second order. Second order accuracy is achieved by piecewise linea...
Assessing the airtightness performance of container-like buildings in relation to its effect on energy efficiency Bekboliev, Mirbek; Tanyer, Ali Murat; Department of Building Science in Architecture (2015) This study analyzes the effect of airtightness on the energy efficiency of single and adjacent containerized buildings, before and after refurbishment. It further gives an overview of air leakage problems found in the sample of prefabricated buildings manufactured and located in Turkey. The air leakage of standard container-like building depends on a number of factors like the age of the building, manufacturing quality and quality of assembly implementation. The airtightness of four typical containerized bu...

Citation Formats

M. Yumuşak and S. Eyi, “Roketlerin aerodinamik ve aerı-termodinamik tasarım optimizasyonu,” 2013. Accessed: 00, 2022. [Online]. Available: https://hdl.handle.net/11511/95807.