Three dimensional turbulence measurement using a single hot-wire

Download
029299.pdf
1993
Sungurlu, Avşar R
Show full item record
92
views
0
downloads
https://hdl.handle.net/11511/9657
Graduate School of Natural and Applied Sciences, Thesis

Suggestions

Three dimensional rocket nozzle design using adjoint method
Eyi, Sinan (2013-01-01)
A design optimization method based on three dimensional Euler equations is developed. A finite volume method is implemented to discretize the Euler equations. Newton’s method is used to solve the discretized form of Euler equations. Newton’s method requires the calculation of the Jacobian matrix which is the derivative of the residual vector with respect to the flux vector. Different upwind methods are used in the calculation of flux vectors. Numerical and analytical methods are utilized in the evaluation o...
Three dimensional rocket nozzle design using adjoint method
Eyi, Sinan (2013-09-16)
A design optimization method based on three dimensional Euler equations is developed. A finite volume method is implemented to discretize the Euler equations. Newton's method is used to solve the discretized form of Euler equations. Newton's method requires the calculation of the Jacobian matrix which is the derivative of the residual vector with respect to the flux vector. Different upwind methods are used in the calculation of flux vectors. Numerical and analytical methods are utilized in the evaluation o...
Three dimensional delamination analysis in composite open hole tensile specimens with cohesive zone method
Bartan Kumbasar, Busra; Acar, Bulent; Kayran, Altan (American Institute of Aeronautics and Astronautics Inc, AIAA; 2016-01-01)
In this article, finite element analyses (FEA) are conducted for delamination analysis in composites using three dimensional (3D) solid cohesive elements. The analyses are validated with tests. The main objective of the study is to predict damage initiation and propagation utilizing three dimensional (3D) solid cohesive elements in an implicit finite element analysis framework. First study is conducted for Double Cantilever Beam (DCB) and End Notch Flexure (ENF) specimens in ABAQUS with cohesive zone method...
Three Dimensional Grain Design Optimizationof Solid Rocket Motors
Yücel, Osman; Sevda, Açık; Atılgan, Toker; Dursunkaya, Zafer; Aksel, Mehmet Haluk (null; 2015-06-19)
This study investigates the ballistic design optimization of three-dimensional grains of solid rocket motors (SRMs). The geometric modeling and burnback analysis of grains are performed analytically by using basic geometries like cylinder, cone, prism, sphere, ellipsoid, and torus. For the internal ballistic analysis, a quasi-steady zero-dimensional flow solver is used. Three different optimization methods are considered: real-coded genetic algorithm (GA), binary genetic algorithm and complex method. The op...
Three dimensional modelling
Sen, Baki; Gökler, Mustafa İ.; Department of Computer Engineering (1987)
Citation Formats
A. R. Sungurlu, “Three dimensional turbulence measurement using a single hot-wire,” Middle East Technical University, 1993.
METU IIS - Integrated Information Service open@metu.edu.tr