Developing turbulent boundary layer along a corner

Download
029295.pdf
1993
Alkışlar, Bahadır
Show full item record
95
views
0
downloads
https://hdl.handle.net/11511/9658
Graduate School of Natural and Applied Sciences, Thesis

Suggestions

Developing fragility functions for marine vessels from field survey in Gumbet bay after 20 july2017 Bodrum-Kos tsunami
Bilgin, Merve; Yalçıner, Ahmet Cevdet; Department of Civil Engineering (2019)
20 July, 2017 Bodrum-Kos earthquake occurred in Gokova Bay caused a tsunami and majority of the marine vessels have significantly been dragged by the tsunami. There were minor, moderate and major damages on the marine vessels in Gumbet Bay. The current velocities and water elevation changes caused by tsunami are computed from the mathematical model NAMI DANCE by applying the three different tsunami source models and the source which results in the most compatible results with the field survey observations i...
Developing fungal reactor for organic chlorine removal from pulping effluents
Taseli, BK; Gökçay, Celal Ferdi (1997-05-01)
Organic halides are considered environmentally suspect as some are known to have toxic, mutagenic and carcinogenic effects on the biota. A fungus, which is able to affect close to 60 % AOX, colour and TOC removals from softwood bleachery effluents in batch tests have been isolated and tentatively identified. This fungus was subsequently tested for its ability to degrade PCP, a common preservative used in controlling wood rot. Low agitation speeds preferred by the fungus during batch culturing indicated its ...
Development of vascularized adipose tissue construct based on adipose tissue extracellular matrix and silk fibroin
Kayabölen, Alişan; Tezcaner, Ayşen; Zor, Fatih; Department of Biomedical Engineering (2015)
Adipose tissue engineering is a promising field for regeneration of soft tissue defects. However, vascularization is needed since cells in the middle layer of thick implants cannot reach to nutrient and oxygen by diffusion. Finding a biocompatible scaffold with good mechanical properties is another problem in this field. In this study, we aimed to develop a thick functional vascularized adipose tissue which supports cell viability and functionality with similar mechanical properties with the adipose tissue....
DEVELOPMENT OF TEXTURED GLASS SUBSTRATES BYALUMINUM INDUCED TEXTURING METHOD
Ünal, Mustafa; Tankut, Aydın; Turan, Raşit (2018-07-04)
Formation of air-entraining vortices at horizontal water intakes /
Zaloğlu, Cihan; Göğüş, Mustafa; Department of Civil Engineering (2014)
The goal of this study is to estimate the critical submergence depths of horizontal water intakes that have symmetrical and asymmetrical approach flow conditions by using empirical equations. Therefore a series of experiments were performed in a reservoir-pipe system dominated by gravity and controlled by a valve. On account of adjustable lateral walls, symmetrical and asymmetrical flow conditions were created at various Froude numbers. For a wide range of discharges and for three different pipe diameters, ...
Citation Formats
B. Alkışlar, “Developing turbulent boundary layer along a corner,” Middle East Technical University, 1993.
METU IIS - Integrated Information Service open@metu.edu.tr