Static aeroelastic tailoring of composite wing boxes

Download
056600.pdf
1996
Ertürk, Cevher Levent
Show full item record
82
views
0
downloads
https://hdl.handle.net/11511/9681
Graduate School of Natural and Applied Sciences, Thesis

Suggestions

Static aeroelastic modeling and parametric study of stacking sequence for laminated composite missile fins
Aslan, Göktuğ Murat; Kurtuluş, Dilek Funda; Department of Aerospace Engineering (2018)
In this thesis, a surface-to-surface missile model with laminated composite fins is examined with respect to one-way static aeroelastic response under constant supersonic flight conditions. Two different modified double wedge fins or control surfaces using for control actuation system of a missile are investigated and compared in terms of aerodynamic and linear structural characteristics in order to minimize tip deflection. A serial set of steady-state supersonic Computational Fluid Dynamics (CFD) analyses ...
Static Aeroelastic calculations for a wing under large deformations
Atik, Hediye; Baran, Özgür Uğraş; Tüzün, Aydin (2012-01-01)
This paper presents a practical workflow on static aeroelastic problems with extreme deflections. The aim of this study is to achieve a fast, yet robust method to calculate the change of the aerodynamic parameters as well as to ensure structural integrity of a wing deforming under aerodynamic loads. To predict static aeroelastic behavior of a high aspect ratio wing, calculations are performed on very fine grids at a relatively large number of flight conditions. Fluid calculations are performed with FLUENT o...
Static aeroelastic analysis of supersonic nozzles and performance response
Duzel, U.; Eyi, Sinan (2014-01-01)
© 2014 by the American Institute of Aeronautics and Astronautics, Inc. All rights reserved.The effects of static aeroelasticity on the performance of supersonic nozzles are analyzed. A flow analysis was conducted to investigate five different configurations of two dimensional convergingdiverging nozzles. Computational results are validated with experimental data. Two of the configurations, which have the same throat area, throat radius, and convergence angle and total nozzle length are selected as the basel...
Static and Dynamic Aeroelastic Analysis of a Very Light Aircraft
Demirer, Halime Gül; Kayran, Altan (2021-09-08)
Aircraft design processes need to ensure that the aircraft will be aeroelastically stable within its operational envelope. This paper presents an overview of the static aeroelastic analysis results, flutter analysis and gust response analysis results of a very light aircraft. MSC.FlightLoads and MSC.Nastran are used for aeroelastic modeling and analysis. Aerodynamic calculations are based on the Doublet-Lattice Method (DLM), the aerodynamic theory employed by Nastran for subsonic flows. DLM requires all lif...
Static and dynamic aeroelastic analysis of a very light Aircraft
Demirer, Halime Gül; Kayran, Altan; Department of Aerospace Engineering (2021-9-10)
Aircraft design processes need to ensure that the aircraft is aeroelastically stable within its operational envelope. This thesis presents an overview of the static aeroelastic, flutter and gust response analysis of a very light aircraft. MSC.FlightLoads and MSC.Nastran are used for aeroelastic modeling and analysis. The methods to be used in the aeroelastic analysis of the VLA are tested on the AGARD 445.6 wing, and the results are in good agreement with the literature. Aeroelastic model corrections such a...
Citation Formats
C. L. Ertürk, “Static aeroelastic tailoring of composite wing boxes,” Middle East Technical University, 1996.
METU IIS - Integrated Information Service open@metu.edu.tr