Thermal and catalytic cracking og used lubricating oil

Download
029414.pdf
1993
Turgut, Arzu
Show full item record
50
views
0
downloads
https://hdl.handle.net/11511/9705
Graduate School of Natural and Applied Sciences, Thesis

Suggestions

Thermal analysis and Combustion Calorimetry of Wood Lignin and its Pyrolysis Products
Kök, Mustafa Verşan; Mikhail, Varfolomeev; Antony, Grachev; Antony, Gerasimov (null; 2015-08-28)
Thermal layer investigation over a heating surface during nucleate pool boiling of detergent added distilled water.
Baycan, Ali; Department of Mechanical Engineering (1973)
Thermal Analysis and Rheological Study of Ocma Type Bentonite Used in Drilling Fluids
Kök, Mustafa Verşan (2013-01-01)
In this research, Ocma type of bentonite sample was studied by x-ray diffraction, Fourier transform spectrophotometer, viscometer, differential scanning calorimeter, and thermogravimetry. It was observed that the major clay mineral was smectite and montmorillonite. Different band intervals were studied by Fourier transform spectrophotometer. The weight loss regions related to the dehydration and de-hydroxylation process were determined by differential scanning calorimeter and thermogravimetry at different h...
Thermal and economical analysis of a desalination system
Dursun, Kadir; Ünsal, Mazhar; Department of Mechanical Engineering (1990)
THERMAL ANALYSIS OF CO-FIRING OF OIL SHALE AND BIOMASS FUELS
Ozgur, Emre; Miller, Sharon Falcone; Miller, Bruce G.; Kök, Mustafa Verşan (2012-01-01)
The effect of co-firing of biomass fuels with oil shale on combustion was investigated Thermogravimetric analysis and differential scanning calorimetry were the tools used to perform the investigation. Since the combustion of biomass is highly exothermic, biomass fuels can serve as an appropriate fuel feedstock. Biomass fuels producing much volatile matter and containing less cellulose are good candidates for co-firing with oil shale. The biomass samples used in the study were hazelnut shell, wheat bran, po...
Citation Formats
A. Turgut, “Thermal and catalytic cracking og used lubricating oil,” Middle East Technical University, 1993.
METU IIS - Integrated Information Service open@metu.edu.tr