Analysis of Forging for C45 Carbon Steel, X20Cr13 Stainless Steel and 42CrMo4 Alloy Steel

Date

2004-06-19

Author

Civelekoğlu, Barış
Darendeliler, Haluk
Gökler, Mustafa İlhan

Metadata

Show full item record

This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

Item Usage Stats

89
views

0
downloads

URI

https://hdl.handle.net/11511/97230

Conference Name

3rd International Conference and Exhibition on Design and Production of Dies and Molds

Collections

Department of Mechanical Engineering, Conference / Seminar

Suggestions

OpenMETU
Core

Analysis of forging for three different alloy steels Civelekoğlu, Barış; Darendeliler, Haluk; Gökler, Mustafa İlhan; Department of Mechanical Engineering (2003) Forging is a manufacturing process which is preferred among the others in that, the final product shows more enhanced properties. The properties of the final product are directly related with the material used in the forging process. Main parameters such as forging temperature, number of stages, preform design, dimensions of the billet, etc. may be affected by the forging material. Alloys are one of the main areas of interest in the forging industry. The use of alloy steels may bring superior properties, es...
Analysis of fiber reinforced composite vessel under hygrothermal loading Sayman, Sümeyra; Parnas, Kemal Levend; Department of Mechanical Engineering (2003) The aim of this study is to develop an explicit analytical formulation based on the anisotropic elasticity theory that determines the behavior of fiber reinforced composite vessel under hygrothermal loading. The loading is studied for three cases separately, which are plane strain case, free ends and pressure vessel cases. For free-end and pressure vessel cases, the vessel is free to expand, on the other hand for plane strain case, the vessel is prevented to expand. Throughout the study, constant, linear an...
Analysis of silo supporting ring beams and intermediate ring stiffeners Zeybek, Özer; Topkaya, Cem; Department of Civil Engineering (2018) Silos in the form of a cylindrical metal shell are commonly supported by a few discrete columns to permit the contained materials to be directly discharged. The discrete supports produce a circumferential non-uniformity in the axial membrane stresses in the silo shell. One way of reducing the non-uniformity of these stresses is to use a very stiff ring beam which partially or fully redistributes the stresses from the local support into uniform stresses in the shell. Another alternative is to use a combinati...
Analysis of infilled reinforced concrete frames strengthened with FRPS Binici, Barış (2005-06-01) In the past various researchers conducted numerous experimental studies, in which different rehabilitation techniques were developed. Among them, use of fiber reinforced polymers (FRPs) was found to be an effective alternative with rapid retrofit time and providing substantial increases in strength with limited ductility. In order to design and detail FRPs based on the results of experiments, analysis and design procedures need to be established. The objective of this study is to fill this gap and propose a...
Analysis of tempering treatment on material properties of DIN 41Cr4 and DIN 42CrMo4 steels Bayrak, Mustafa; Ozturk, Fahrettin; Demirezen, Mehmet; Evis, Zafer (Springer Science and Business Media LLC, 2007-10-01) DIN 41Cr4 and DIN 42CrMo4 materials have been widely used in automotive driving elements. Although 42CrMo4 is more expensive than 41Cr4, it is more preferable in terms of material properties. In this study, these two materials were heat treated by austenitizing in a continuous furnace at 850 degrees C and quenched in oil at 90 degrees C. After they were tempered at various temperatures, mechanical properties were determined for each tempering temperature. The material properties for both materials were comp...

Citation Formats

B. Civelekoğlu, H. Darendeliler, and M. İ. Gökler, “Analysis of Forging for C45 Carbon Steel, X20Cr13 Stainless Steel and 42CrMo4 Alloy Steel,” presented at the 3rd International Conference and Exhibition on Design and Production of Dies and Molds, Bursa, Türkiye, 2004, Accessed: 00, 2022. [Online]. Available: https://hdl.handle.net/11511/97230.