Three-dimensional measurement of laminar flow inside a static mixer

Date

2012-09-09

Author

Jilisen, Rtm
Bloemen, Pr
Başkan Perçin, Özge
Speetjens, Michel

Metadata

Show full item record

This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

Item Usage Stats

14
views

0
downloads

URI

https://hdl.handle.net/11511/97477

Conference Name

9th European Fluid Mechanics Conference

Collections

Department of Aerospace Engineering, Conference / Seminar

Suggestions

OpenMETU
Core

Meteoroloji Radarı Görüntülerinden Üç-Boyutlu Geriçatım ve Görselleştirme Pesen, Mustafa; Leloğlu, Uğur Murat (null; 2018-09-21) Hava olaylarının izlenmesi ve tahmininde, uydular, meteoroloji istasyonları ve balonlar gibi çok sayıda algılayıcıdan faydalanılmaktadır. Meteoroloji radarları da aynı amaçla kullanılan önemli algılayıcılardır. Radarlar, etrafında onlarca kilometre ile ölçülen bir yarıçap içerisinde üç boyutlu olarak gerçek-zamanlı veri sağladıkları için kilit öneme sahiptirler. Radarlar çeşitli yükselme açılarında iki boyutlu görüntüler sağladıkları için bunların gözle yorumlanmaları güçtür. Bu çalışmada, iki boyutlu görün...
Three-dimensional modeling of intersonic shear-crack growth in asymmetrically loaded unidirectional composite plates Yu, C.; Pandolfi, A.; Ortiz, M.; Çöker, Demirkan; Rosakis, A.J. (Elsevier BV, 2002-12) An anisotropic cohesive model of fracture is applied to the numerical simulation of Coker and Rosakis experiments (2001). In these experiments, a unidirectional graphite-epoxy composites plate was impacted with a projectile, resulting in an intersonic shear-dominated crack growth. The simulations account for explicit crack nucleation-through a self-adaptive remeshing procedure-crack closure and frictional sliding. The parameters used in the cohesive model are obtained from quasi-static fracture experiments,...
Three-dimensional modeling of a high temperature polymer electrolyte membrane fuel cell at different operation temperatures Caglayan, Dilara Gulcin; Sezgin, Berna; DEVRİM, YILSER; Eroğlu, İnci (2016-06-22) A three-dimensional model for a high temperature polymer electrolyte membrane (PEM) fuel cell having an active area of 25 cm(2) is developed. Triple mixed serpentine flow channel single cell with phosphoric acid doped polybenzimidazole (FBI) membrane is used in the model. Steady-state, isothermal, single phase assumptions are defined for the system. The model is simulated at different temperatures ranging from 100 to 180 degrees C to investigate the influence of operation temperature on the performance of t...
Three-dimensional modelling of stratified coastal waters Balas, L; Ozhan, E (2002-01-01) An implicit baroclinic 3-D model developed to simulate the circulation in coastal waters, is presented. The model has hydrodynamic, transport and turbulence model components. It is a composite finite difference-finite element model. In the horizontal plane, second order central finite differences on a staggered scheme and in the vertical Galerkin method with linear shape functions are used. Implicit equations are solved by Crank Nicholson method which has second order accuracy in time also. Developed model ...
Three-dimensional experimental investigation of a low speed axial flow compressor stage Özveren, Vahit; Akmandor, İ. Sinan; Department of Aeronautical Engineering (2000)

Citation Formats

R. Jilisen, P. Bloemen, Ö. Başkan Perçin, and M. Speetjens, “Three-dimensional measurement of laminar flow inside a static mixer,” presented at the 9th European Fluid Mechanics Conference, Rome, İtalya, 2012, Accessed: 00, 2022. [Online]. Available: https://hdl.handle.net/11511/97477.