Comparison and Evaluation of Open-Source Panel Method Codes against Commercial Codes

2022-06-01
Uçar, Muhammed
Uzunoğlu, Emre
Oğuz, Elif
GMO Journal of Ship and Marine Technology, Gemi ve Deniz Teknolojisi Dergisi

Suggestions

Comparison and Evaluation of Open-Source Panel Method Codes against Commercial Codes
Uçar, Muhammet; Uzunoğlu, Emre; Oğuz, Elif (2021-09-16)
This work provides a benchmark study regarding the open-source panel method codes of two floating wind turbine platforms. HAMS, NEMOH, and WAMIT are compared in terms of their results, computational performance, user-friendliness, and, flexibility. WAMIT’s data is sourced from previous publications for the OC3 Hywind Spar and OC4 DeepCWind Semisubmersible. These reference values are compared to NEMOH and HAMS for wave excitation forces, added mass values, and potential damping. The study aims to help resear...
Comparison and evaluation of three dimensional passive source localization techniques
Batuman, Emrah; Tuncer, Temel Engin; Department of Electrical and Electronics Engineering (2010)
Passive source localization is the estimation of the positions of the sources or emitters given the sensor data. In this thesis, some of the well known methods for passive source localization are investigated and compared in a stationary emitter sensor framework. These algorithms are discussed in detail in two and three dimensions for both single and multiple target cases. Passive source localization methods can be divided into two groups as two-step algorithms and single-step algorithms. Angle-of-Arrival (...
Comparison and evaluation of various MESFET models
Altay, Mirkan; Toker, Canan; Department of Electrical and Electronics Engineering (2005)
There exist various models for Microwave MESFET equivalent circuit representations. These models use different mathematical models to describe the same MESFET and give similar results. However, there are some differences in the results when compared to the experimental measurements. In this thesis, various theoretical models are applied to the same MESFET and comparison made with measured data. It is shown that some models worked better on some parameters of the MESFET, while the others were more effective ...
Comparison of Cognitive Modeling and User Performance Analysis for Touch Screen Mobile Interface Design
Ocak, Nihan; Çağıltay, Kürşat (Informa UK Limited, 2016-12-23)
The aim of this study is to analyze and comparatively evaluate the usability of touch screen mobile applications through cognitive modeling and end-user usability testing methodologies. The study investigates the accuracy of the estimated results of a cognitive model produced for touch screen mobile phone interfaces. A mobile wallet application was chosen as the mobile software. The CogTool modeling tool was used as the cognitive modeling method. Eight tasks were determined and user tests were conducted in ...
Comparison of cognitive modeling and user performance analysis for touch screen mobile interface design
Ocak, Nihan; Çağıltay, Kürşat; Department of Information Systems (2014)
The main aim of this thesis is to analyze and comparatively evaluate the usability of touch screen mobile applications through cognitive modeling and end-user usability testing. The study investigates the accuracy of the estimated results cognitive model produces for touch screen mobile phone interfaces. CogTool application was used as the cognitive modeling method. Turkcell Cüzdan application, which is suitable for the implementation of both methods, was chosen as the mobile application. Based on the feedb...
Citation Formats
M. Uçar, E. Uzunoğlu, and E. Oğuz, “Comparison and Evaluation of Open-Source Panel Method Codes against Commercial Codes,” GMO Journal of Ship and Marine Technology, Gemi ve Deniz Teknolojisi Dergisi, vol. 221, pp. 86–108, 2022, Accessed: 00, 2022. [Online]. Available: https://hdl.handle.net/11511/97999.