Analysis of Side-Wall Wrinkling in Deep Drawing Processes

Date

2022-01-01

Author

Dal, Saniye Rabia
Darendeliler, Haluk

Metadata

Show full item record

This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

Item Usage Stats

58
views

0
downloads

URI

http://dx.doi.org/10.4028/p-i5q886
https://hdl.handle.net/11511/98451

Journal

KEY ENGINEERING MATERIALS

DOI

https://doi.org/10.4028/p-i5q886

Collections

Department of Mechanical Engineering, Article

Suggestions

OpenMETU
Core

Analysis of wrinkling in deep drawing processes Dal, Saniye Rabia; Darendeliler, Haluk; Department of Mechanical Engineering (2019) Wrinkling, observed due to compressive instability, is one of the main failure modes in deep drawing processes. The prediction and prevention of wrinkles are critical for production of stamping parts which require good surface quality. In the current work, the occurrence of wrinkling in square and cylindrical cup deep drawing processes are investigated considering various constitutive models; formed by using CPB06ex2, Hill’48, BBC2008-8p, BBC2008-16p, and von Mises yield criterion with isotropic, kinematic ...
Analysis of tube upsetting Tüzün, Aydın; Darendeliler, Haluk; Department of Mechanical Engineering (2004) Producing axi-symmetrical parts with holes from tubular stock by tube upsetting is a frequently used technique in industry. There are basically four types of tube upsetting process; external, internal, simultaneous internal and external upsetting, and expanding of tube. In general, tubular parts require more than one upsetting stage. In industry, generally trial-error methods, which require lots of time and effort depending on experience, are used for the design of stages. Wrong design causes failures durin...
Analysis of tapered preforms in cold upsetting Gökler, Mustafa İlhan; Darendeliler, Haluk (1999-01-01) Upset forging is usually carried out with a sequence of stages and the tapered preforms are commonly used. The preforms should be free from flash formation and buckling injuries. :In this paper, the results that depend on elastic-plastic finite element analysis of taper upset forging are given. The buckling analysis was realized by using the Modified Riks method. For a given upset ratio which is the ratio of unsupported length to diameter of the initial billet, reduction in the height of the billet and the ...
Analysis of Field-Effect Passivation in Textured and Undiffused Silicon Surfaces Turkay, Deniz; Koroglu, Cagil; Yerci, Selçuk (2019-09-13) In this work, we present a numerical analysis comparing the field-effect passivation provided by fixed dielectric charges on planar and textured undiffused silicon surfaces. We focus particularly on the ratio of effective surface recombination velocities (S-eff) of planar and textured surfaces (sigma=S-eff,S-textured/S-eff,S-planar) utilizing the same fixed dielectric charge density (Q(f)) under the same injection conditions. To ensure a difference between the space-charge region profiles of textured and pl...
Analysis of absorption of gases on bidisperse porous catalysts by a pulse-response technique. Ercan, Cemal; Department of Chemical Engineering (1980)

Citation Formats

S. R. Dal and H. Darendeliler, “Analysis of Side-Wall Wrinkling in Deep Drawing Processes,” KEY ENGINEERING MATERIALS, vol. 926, pp. 732–743, 2022, Accessed: 00, 2022. [Online]. Available: http://dx.doi.org/10.4028/p-i5q886.