Experimental Validation of Detachable Links for Eccentrically Braced Frames

Date

2021-09-01

Author

BOZKURT, MEHMET BAKIR
Topkaya, Cem

Metadata

Show full item record

This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

Item Usage Stats

12
views

0
downloads

URI

https://hdl.handle.net/11511/99092

Conference Name

Eurosteel 2020

Collections

Department of Civil Engineering, Conference / Seminar

Suggestions

OpenMETU
Core

Experimental Investigation of Viscous Flow Normal to NACA 0012 Airfoil at low Reynolds Numbers Gunaydınoglu, Erkan; Kurtuluş, Dilek Funda (null; 2018-07-11) The low Reynolds number aerodynamics at high angle of attack is crucial for the design of unmanned aerial vehicles and wind turbine blades. The current study aims to enhance the insight on the near wake of airfoils normal to free stream. The near wake structure on a NACA 0012 airfoil normal to free-stream is measured with particle image velocimetry in the range of Reynolds number 7000 to 20000. The velocity and vorticity fields of the wake structures are studied and further analysis with Proper Orthogonal D...
Experimental Investigation of Eccentric Reinforced Concrete Beam-Column-Slab Connections under Earthquake Loading Burak Bakır, Burcu (2004-08-01) The inelastic behavior of beam-to-column joints has been studied since 1960’s; however, there is still limited information on eccentric connections, in which the centerline of the spandrel beam does not coincide with the centroid of the column. In this experimental study, the seismic behavior of three 3/4- scale eccentric beam-column-slab subassemblies was investigated. The main design parameters were selected as the eccentricity, normal beam width, and column section aspect ratio. The eccentricity between ...
Experimental Investigation of Thermal Performance of a Silicon Flat Plate Grooved Heat Pipe with an integrated heater and cooler Kurt, Cem; Alijani, Hossein; Çetin, Barbaros; Akkuş, Yiğit; Dursunkaya, Zafer (2018-06-13)
Experimental investigation of flow characteristics of flexible wings with different stiffener orientations in linear translating motion Karakaş, Hasan Halil; Perçin, Mustafa; Department of Aerospace Engineering (2022-8-12) This study experimentally investigates the flow field around the wings, which first accelerate with constant acceleration from the rest and then perform a linear translating motion with constant velocity. Four wings, which are 3D-printed, with a bending stiffness in different directions are examined. The difference in bending stiffness values is achieved by placing stiffeners having different angles with the leading edge on the upper surface of the wing. The stiffeners are printed with wings to obtain well-...
Experimental investigation of a pressure swirl atomizer spry Marchione, T.; Allouis, Christophe Gerard; Amoresano, A.; Beretta, F. (2007-09-01) The fuel injector has an important role in the process for an efficient combustion because it increases the specific surface area of the fuel and it allows one to reach high rates of mixing and evaporation. This paper has focused on the behavior of kerosene Jet A-1 spray produced by commercial pressure swirl atomizers in terms of mean diameter distributions, velocity component profiles, and cone angle variations over time. The analysis has been carried out experimentally with the aid of a phase-Doppler anem...

Citation Formats

M. B. BOZKURT and C. Topkaya, “Experimental Validation of Detachable Links for Eccentrically Braced Frames,” presented at the Eurosteel 2020, İngiltere, 2021, Accessed: 00, 2022. [Online]. Available: https://hdl.handle.net/11511/99092.